Water hardness in Butte County, ID
Water in Butte County is hard, with a median of 179 mg/L (10.5 grains per gallon) across 153 monitoring sites.
Butte County water at a glance
- HardnessHard (179 mg/L, 10.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 179 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 10.5 gpg (10 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Butte County
Prefilled with Butte County's measured local hardness of 179 mg/L (10.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Butte County on the Idaho map
Cities and communities in Butte County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Arco | 208 | Very hard | 12 sites within 10 miles |
| Moore | 183 | Very hard | 12 sites within 10 miles |
| Butte City | 208 | Very hard | 12 sites within 10 miles |
Water quality in Butte County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Arco | City of Arco | Not tested | 0 lead · 276 unknown | 1 |
| Butte City | City of Butte | Not tested | 0 lead · 1 unknown | None |
Neighboring counties
- Jefferson County198 mg/L
- Blaine County168 mg/L
- Bingham County214 mg/L
- Clark County126 mg/L
- Minidoka County257 mg/L
- Custer County88 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.