Water hardness in Sheridan County, WY

Water in Sheridan County is very hard, with a median of 451 mg/L (26.3 grains per gallon) across 69 monitoring sites.

135% harder than the Wyoming median (192 mg/L) 4th hardest of 23 counties
451mg/L
26.3 grains per gallon
Very hard

Sheridan County water at a glance

  • HardnessVery hard (451 mg/L, 26.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 451 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 26.3 gpg (25.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites69
Lab samples2,182
Sample years2000–2022
Middle 50% of sites275–620 mg/L
Groundwater (wells, springs)416 mg/L · 40 sites
Surface water (rivers, lakes)462 mg/L · 29 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Sheridan County

Prefilled with Sheridan County's measured local hardness of 451 mg/L (26.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Sheridan County on the Wyoming map

Lincoln CountyPlatte CountyWashakie CountyPark CountyUinta CountyCampbell CountyConverse CountyGoshen CountyTeton CountyNatrona CountyNiobrara CountySweetwater CountySublette CountyBig Horn CountyHot Springs CountyAlbany CountyFremont CountyCarbon CountyCrook CountyLaramie CountyJohnson CountyWeston County

Cities and communities in Sheridan County

PlaceMedian mg/LClassBased on
Sheridan 451 Very hard 34 sites within 10 miles
Ranchester 352 Very hard 7 sites within 10 miles
Story (CDP) 379 Very hard 15 sites within 10 miles
Dayton 400 Very hard 5 sites within 10 miles
Big Horn (CDP) 440 Very hard 32 sites within 10 miles
Parkman (CDP) 546 Very hard 4 sites within 10 miles
Clearmont 27 Soft 4 sites within 10 miles
Arvada (CDP) 497 Very hard 8 sites within 10 miles
Powder Horn (CDP) 451 Very hard 33 sites within 10 miles

Water quality in Sheridan County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Sheridan City of Sheridan WY None detected 397 lead · 1,700 unknown None
Ranchester Town of Ranchester Not tested 0 lead · 320 unknown None
Dayton Town of Dayton Not tested 0 lead · 0 unknown None
Clearmont Town of Clearmont Not tested 0 lead · 24 unknown None

Neighboring counties

Wyoming

The statewide median is 192 mg/L (very hard) from 810 sites.

Wyoming hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next