Water hardness in Goshen County, WY

Water in Goshen County is very hard, with a median of 195 mg/L (11.4 grains per gallon) across 31 monitoring sites.

about the same as the Wyoming median (192 mg/L) 14th hardest of 23 counties
195mg/L
11.4 grains per gallon
Very hard

Goshen County water at a glance

  • HardnessVery hard (195 mg/L, 11.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 195 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 11.4 gpg (10.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites31
Lab samples31
Sample years2002–2012
Middle 50% of sites67–272 mg/L
Groundwater (wells, springs)187 mg/L · 30 sites
Surface water (rivers, lakes)249 mg/L · 1 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Goshen County

Prefilled with Goshen County's measured local hardness of 195 mg/L (11.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Goshen County on the Wyoming map

Lincoln CountyPlatte CountyWashakie CountyPark CountyUinta CountyCampbell CountyConverse CountyTeton CountyNatrona CountyNiobrara CountySweetwater CountySublette CountyBig Horn CountyHot Springs CountyAlbany CountyFremont CountyCarbon CountyCrook CountyLaramie CountyJohnson CountySheridan CountyWeston County

Cities and communities in Goshen County

PlaceMedian mg/LClassBased on
Torrington 267 Very hard 13 sites within 10 miles
Lingle 271 Very hard 12 sites within 10 miles
LaGrange 195 Very hard county median
Fort Laramie 240 Very hard 7 sites within 10 miles
Yoder 18 Soft 8 sites within 10 miles
Hawk Springs (CDP) 8 Soft 3 sites within 10 miles
Huntley (CDP) 73 Moderately hard 11 sites within 10 miles
Veteran (CDP) 10 Soft 3 sites within 10 miles

Water quality in Goshen County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Torrington City of Torrington Municipal Water Dept None detected 0 lead · 809 unknown None
Lingle Town of Lingle Not tested 0 lead · 269 unknown None
Fort Laramie Town of Fort Laramie Not tested 0 lead · 1 unknown None
Yoder Town of Yoder Not tested 0 lead · 6 unknown 1

Neighboring counties

Wyoming

The statewide median is 192 mg/L (very hard) from 810 sites.

Wyoming hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next