Water hardness in Shelbyville, TN
Water in Shelbyville is very hard, with a median of 191 mg/L (11.2 grains per gallon) across 23 monitoring sites within 10 miles.
Shelbyville tap water at a glance
- HardnessVery hard (191 mg/L, 11.2 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS6 found; the highest PFOA and PFOS result was above EPA's 4 ppt limit (a single result is not a violation).Filters that remove PFAS →
- Lead pipesNo known lead lines; 7,974 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 191 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 11.2 gpg (10.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Shelbyville
Prefilled with Shelbyville's measured local hardness of 191 mg/L (11.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Shelbyville tap water
Shelbyville Water System is the main public water system for Shelbyville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Jun 2023 – Mar 2024. 6 PFAS were detected. The highest PFOA and PFOS results were above EPA's drinking water limit (4 ppt).
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFOA perfluorooctanoic acid | 7.9 ppt | 4 of 4 samples | 4 ppt |
| PFBS perfluorobutane sulfonic acid | 7.4 ppt | 4 of 4 samples | — |
| PFOS perfluorooctane sulfonic acid | 5.9 ppt | 3 of 4 samples | 4 ppt |
| PFBA perfluorobutanoic acid | 5.8 ppt | 2 of 4 samples | — |
| PFHxA perfluorohexanoic acid | 4.3 ppt | 3 of 4 samples | — |
| PFPeA perfluoropentanoic acid | 4 ppt | 2 of 4 samples | — |
Other water systems serving parts of Shelbyville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Bedford County Utility District serves over 10,000 people | PFOA, PFBS, PFOS +2 more | 8.2 / 4.8 ppt | Aug 2023 – Jun 2024 |
| Tullahoma Utilities Authority serves over 10,000 people | PFOA, PFBS, PFBA +4 more | 9.6 / 4.8 ppt | Dec 2024 – Sep 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Shelbyville
Shelbyville Water System reported 10,731 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 7,974 lines are still of unknown material.
Other water systems serving parts of Shelbyville
| Water system | Service lines | Total |
|---|---|---|
| Bedford County U.D. | 0 lead · 0 galvanized · 0 unknown | 8,401 |
| Tullahoma Utilities Authority | 0 lead · 0 galvanized · 0 unknown | 11,249 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Shelbyville drinking water violations
EPA records show no health-based violations for Shelbyville Water System since 2016.
Other water systems serving parts of Shelbyville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Bedford County Utility District | 13 | 5 |
| Tullahoma Utilities Authority | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Shelbyville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Bd:L-41 USGS Tennessee Water Science Center | Well | 2.4 mi | 322 mg/L | 1 | 2000 |
| HURRICANE CREEK Tennessee Department of Environment and Conservation | River/Stream | 2.8 mi | 200 mg/L | 4 | 2000 |
| FLAT CREEK Tennessee Department of Environment and Conservation | River/Stream | 3 mi | 168 mg/L | 2 | 2000 |
| Duck River Tennessee Department of Environment and Conservation | River/Stream | 3.2 mi | 153 mg/L | 1 | 2000 |
| Sugar Creek Tennessee Department of Environment and Conservation | River/Stream | 3.5 mi | 175 mg/L | 20 | 2003–2004 |
| Bd:E-09 USGS Tennessee Water Science Center | Well | 4.5 mi | 146 mg/L | 1 | 2000 |
Water hardness in towns near Shelbyville
| Town | Distance | Median | Class |
|---|---|---|---|
| Tullahoma | 16 mi | 82 mg/L | Moderately hard |
| Lewisburg | 19 mi | 208 mg/L | Very hard |
| Manchester | 21 mi | 81 mg/L | Moderately hard |
| Murfreesboro | 24 mi | 205 mg/L | Very hard |
| Spring Hill | 31 mi | 237 mg/L | Very hard |
| Smyrna | 33 mi | 220 mg/L | Very hard |
| Nolensville | 34 mi | 246 mg/L | Very hard |
| Columbia | 34 mi | 214 mg/L | Very hard |
| Franklin | 36 mi | 234 mg/L | Very hard |
| La Vergne | 36 mi | 218 mg/L | Very hard |
Bedford County
Shelbyville is in Bedford County, where the median is 179 mg/L (hard) across 37 sites.
See all of Bedford County →Tennessee
The statewide median is 98 mg/L (moderately hard) from 3,359 sites.
Tennessee hardness map →Shelbyville, TN water: common questions
Do I need a water softener in Shelbyville?
Very likely. Water measured around Shelbyville is 11.2 gpg (191 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 20,000 grains.Size it for your household →
Who supplies Shelbyville's drinking water?
The main public water system serving Shelbyville in EPA records is Shelbyville Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Shelbyville?
It depends on what you want to remove. In Shelbyville, EPA testing found PFOA, PFBS and PFOS and 3 other PFAS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 6 PFAS in Shelbyville's main water system.
- How to tell if your home has a lead pipe7,974 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.