Water hardness in Franklin, TN

Water in Franklin is very hard, with a median of 234 mg/L (13.7 grains per gallon) across 39 monitoring sites within 10 miles.

139% harder than the Tennessee median (98 mg/L) 8th hardest of 66 Tennessee towns Population 88,558
234mg/L
13.7 grains per gallon
Very hard

Franklin tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 234 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13.7 gpg (13.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites39
Lab samples287
Sample years2001–2015
Middle 50% of sites206–280 mg/L
Groundwater (wells, springs)796 mg/L · 4 sites
Surface water (rivers, lakes)228 mg/L · 35 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Franklin

Prefilled with Franklin's measured local hardness of 234 mg/L (13.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Franklin tap water

Franklin Water Dept is the main public water system for Franklin. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Sep 2024 – Jun 2025. 1 PFAS was detected.

ChemicalHighest resultDetected inEPA limit
PFBA
perfluorobutanoic acid
6.1 ppt 2 of 8 samples —

Other water systems serving parts of Franklin

Water systemPFAS detectedHighest PFOA / PFOSTested
Harpeth Valley U D
serves over 10,000 people
None detected — Feb 2023 – Nov 2023
Mallory Valley Utility District
serves over 10,000 people
None detected — May 2024 – Feb 2025
Milcrofton Utility District
serves over 10,000 people
None detected — Jan 2025 – Oct 2025
H.B.& T.S. Utility District
serves over 10,000 people
None detected — Oct 2023 – Jul 2024
Brentwood Water Deptartment
serves over 10,000 people
None detected — Jul 2024 – Apr 2025

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Franklin

Franklin Water Dept reported 18,907 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.

0lead (0%)
0galvanized requiring replacement
0unknown material (0%)
18,907not lead (100%)

Other water systems serving parts of Franklin

Water systemService linesTotal
Harpeth Valley U.D.0 lead · 0 galvanized · 0 unknown19,093
Mallory Valley U.D.0 lead · 0 galvanized · 0 unknown5,695
Milcrofton Utility District0 lead · 0 galvanized · 0 unknown12,530
H.B.& T.S. Utility District0 lead · 0 galvanized · 0 unknown13,241
Brentwood Water Department0 lead · 0 galvanized · 0 unknown10,435

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Franklin drinking water violations

EPA records show 7 health-based violations for Franklin Water Dept since 2016, all since resolved or closed. The most recent began in Jan 2023. It also had 8 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Total trihalomethanes (TTHM)
byproducts formed when chlorine reacts with natural matter in water · what it means
highest measured 0.093 MG/L; limit 0.080 mg/L
Contaminant above legal limit 7 Jan 2023 Resolved/closed

Other water systems serving parts of Franklin

Water systemHealth-based violationsMonitoring/reporting
Harpeth Valley U DNone2
Mallory Valley Utility DistrictNone1
Milcrofton Utility DistrictNone0
H.B.& T.S. Utility DistrictNone5
Brentwood Water DeptartmentNone1

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Franklin

SiteTypeDistanceMedianSamplesYears
Watson Branch
TDEC Division of Water Resources
River/Stream 1.7 mi340 mg/L22010
Harpeth River
Tennessee Department of Environment and Conservation
River/Stream 1.9 mi193 mg/L142001–2002
Harpeth River
TDEC Division of Water Resources
River/Stream 2 mi210 mg/L122011–2012
Spencer Creek
TDEC Division of Water Resources
River/Stream 2.1 mi300 mg/L112011–2012
Fivemile Creek
TDEC Division of Water Resources
River/Stream 2.6 mi260 mg/L112011–2012
Five Mile Creek
Tennessee Department of Environment and Conservation
River/Stream 3.2 mi228 mg/L92001–2002

Water hardness in towns near Franklin

TownDistanceMedianClass
Brentwood7 mi 237 mg/LVery hard
Nolensville11 mi 246 mg/LVery hard
Spring Hill12 mi 237 mg/LVery hard
Fairview16 mi 140 mg/LHard
La Vergne18 mi 218 mg/LVery hard
Nashville18 mi 228 mg/LVery hard
Smyrna18 mi 220 mg/LVery hard
Columbia23 mi 214 mg/LVery hard
Murfreesboro24 mi 205 mg/LVery hard
Mount Juliet27 mi 198 mg/LVery hard

Williamson County

Franklin is in Williamson County, where the median is 216 mg/L (very hard) across 53 sites.

See all of Williamson County →

Tennessee

The statewide median is 98 mg/L (moderately hard) from 3,359 sites.

Tennessee hardness map →

Franklin, TN water: common questions

Do I need a water softener in Franklin?

Very likely. Water measured around Franklin is 13.7 gpg (234 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 24,000 grains.Size it for your household →

Who supplies Franklin's drinking water?

The main public water system serving Franklin in EPA records is Franklin Water Dept. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Franklin?

It depends on what you want to remove. In Franklin, EPA testing found PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 7 health-based violations since 2016, for TTHM; the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next