Water hardness in Bedford County, TN

Water in Bedford County is hard, with a median of 179 mg/L (10.5 grains per gallon) across 37 monitoring sites.

83% harder than the Tennessee median (98 mg/L) 17th hardest of 95 counties
179mg/L
10.5 grains per gallon
Hard

Bedford County water at a glance

  • HardnessHard (179 mg/L, 10.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 179 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 10.5 gpg (10 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites37
Lab samples227
Sample years2000–2019
Middle 50% of sites153–198 mg/L
Groundwater (wells, springs)155 mg/L · 9 sites
Surface water (rivers, lakes)182 mg/L · 28 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Bedford County

Prefilled with Bedford County's measured local hardness of 179 mg/L (10.5 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Bedford County on the Tennessee map

Henderson CountyGrundy CountyCannon CountyRhea CountyMcNairy CountyPickett CountyLewis CountyTrousdale CountyMeigs CountyHardeman CountyHaywood CountyMarshall CountySequatchie CountyFranklin CountyLincoln CountyMcMinn CountyWhite CountyBledsoe CountyCheatham CountyStewart CountyHamilton CountyDecatur CountyLake CountyCocke CountyLauderdale CountyLoudon CountyHamblen CountyMaury CountySumner CountyWeakley CountyWilliamson CountyGibson CountyMorgan CountyCoffee CountyWarren CountyHenry CountyCarter CountyHouston CountyHumphreys CountyDavidson CountyKnox CountyCampbell CountyRoane CountyScott CountyMadison CountyTipton CountyMoore CountyCrockett CountyWayne CountyVan Buren CountyDeKalb CountyJackson CountyHawkins CountyAnderson CountyPutnam CountyBenton CountyJefferson CountyMacon CountyDickson CountyPolk CountyMonroe CountyJohnson CountyGiles CountyHardin CountyUnion CountyLawrence CountyHickman CountyCarroll CountyClay CountyGreene CountyHancock CountyFayette CountyGrainger CountyWashington CountySmith CountyWilson CountyBradley CountyRutherford CountyShelby CountySevier CountyFentress CountyOverton CountyDyer CountyMontgomery CountyPerry CountyUnicoi CountyClaiborne CountyMarion CountySullivan CountyRobertson CountyCumberland CountyBlount CountyObion CountyChester County

Cities and communities in Bedford County

PlaceMedian mg/LClassBased on
Shelbyville 191 Very hard 23 sites within 10 miles
Unionville (CDP) 191 Very hard 37 sites within 10 miles
Wartrace 96 Moderately hard 16 sites within 10 miles
Bell Buckle 194 Very hard 17 sites within 10 miles
Normandy 83 Moderately hard 24 sites within 10 miles

Water quality in Bedford County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Shelbyville Shelbyville Water System 6 found (PFOA 7.9 / PFOS 5.9 ppt) 0 lead · 7,974 unknown None
Wartrace Wartrace Water System 7 found (PFOA 11.6 / PFOS 6.1 ppt) 0 lead · 69 unknown None
Bell Buckle Bell Buckle Water System Not tested 1 lead · 0 unknown 1

Neighboring counties

Tennessee

The statewide median is 98 mg/L (moderately hard) from 3,359 sites.

Tennessee hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next