Water hardness in Maryville, TN
Water in Maryville is hard, with a median of 129 mg/L (7.5 grains per gallon) across 33 monitoring sites within 10 miles.
Maryville tap water at a glance
- HardnessHard (129 mg/L, 7.5 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo known lead lines; 2,155 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 129 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7.5 gpg (7.2 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Maryville
Prefilled with Maryville's measured local hardness of 129 mg/L (7.5 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Maryville tap water
City of Maryville Water and Sewer Dept is the main public water system for Maryville. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Apr 2023 – Jan 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Maryville
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| South Blount Utility District serves over 10,000 people | None detected | — | Feb 2024 – Nov 2024 |
| Alcoa Water System serves over 10,000 people | None detected | — | Feb 2024 – Feb 2025 |
| Tuckaleechee Utility District serves over 10,000 people | None detected | — | May 2025 – Feb 2026 |
| Tellico Area Services System serves over 10,000 people | None detected | — | Dec 2023 – Sep 2024 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Maryville
City of Maryville W&S Dept reported 17,721 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 2,155 lines are still of unknown material.
Other water systems serving parts of Maryville
| Water system | Service lines | Total |
|---|---|---|
| South Blount Utility District | 0 lead · 0 galvanized · 0 unknown | 17,698 |
| Alcoa Water System | 0 lead · 0 galvanized · 2,360 unknown | 11,248 |
| Tuckaleechee Utility District | 0 lead · 123 galvanized · 0 unknown | 4,834 |
| Tellico Area Services System | 0 lead · 0 galvanized · 1,794 unknown | 6,419 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Maryville drinking water violations
EPA records show no health-based violations for City of Maryville Water and Sewer Dept since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Maryville
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| South Blount Utility District | 1 | 1 |
| Alcoa Water System | 1 | 1 |
| Tuckaleechee Utility District | None | 14 |
| Tellico Area Services System | None | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Maryville
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Pistol Creek Tennessee Department of Environment and Conservation | River/Stream | 0.7 mi | 225 mg/L | 10 | 2005–2006 |
| Brown Creek Tennessee Department of Environment and Conservation | River/Stream | 1.4 mi | 245 mg/L | 10 | 2005–2006 |
| DUNCAN BR Tennessee Department of Environment and Conservation | River/Stream | 1.5 mi | 245 mg/L | 1 | 2005 |
| Pistol Creek Tennessee Department of Environment and Conservation | River/Stream | 1.5 mi | 222 mg/L | 10 | 2005–2006 |
| Culton Creek Tennessee Department of Environment and Conservation | River/Stream | 2.7 mi | 191 mg/L | 10 | 2005–2006 |
| Springfield Branch Tennessee Department of Environment and Conservation | River/Stream | 2.9 mi | 223 mg/L | 10 | 2005–2006 |
Water hardness in towns near Maryville
| Town | Distance | Median | Class |
|---|---|---|---|
| Alcoa | 4 mi | 148 mg/L | Hard |
| Farragut | 14 mi | 170 mg/L | Hard |
| Seymour | 15 mi | 130 mg/L | Hard |
| Knoxville | 15 mi | 166 mg/L | Hard |
| Lenoir City | 18 mi | 147 mg/L | Hard |
| Oak Ridge | 23 mi | 164 mg/L | Hard |
| Sevierville | 24 mi | 190 mg/L | Very hard |
| Clinton | 26 mi | 160 mg/L | Hard |
| Athens | 40 mi | 160 mg/L | Hard |
| Morristown | 49 mi | 251 mg/L | Very hard |
Blount County
Maryville is in Blount County, where the median is 69 mg/L (moderately hard) across 66 sites.
See all of Blount County →Tennessee
The statewide median is 98 mg/L (moderately hard) from 3,359 sites.
Tennessee hardness map →Maryville, TN water: common questions
Do I need a water softener in Maryville?
Many homes here use one. Water measured around Maryville is 7.5 gpg (129 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 13,000 grains.Size it for your household →
Who supplies Maryville's drinking water?
The main public water system serving Maryville in EPA records is City of Maryville Water and Sewer Dept. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Maryville?
Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- How to tell if your home has a lead pipe2,155 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.