Water hardness in Alcoa, TN

Water in Alcoa is hard, with a median of 148 mg/L (8.6 grains per gallon) across 37 monitoring sites within 10 miles.

51% harder than the Tennessee median (98 mg/L) 35th hardest of 66 Tennessee towns Population 13,349
148mg/L
8.6 grains per gallon
Hard

Alcoa tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 148 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 8.6 gpg (8.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites37
Lab samples368
Sample years2000–2022
Middle 50% of sites86–188 mg/L
Groundwater (wells, springs)148 mg/L · 1 sites
Surface water (rivers, lakes)150 mg/L · 36 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Alcoa

Prefilled with Alcoa's measured local hardness of 148 mg/L (8.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Alcoa tap water

Alcoa Water System is the main public water system for Alcoa. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Feb 2024 – Feb 2025. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Alcoa

Water systemPFAS detectedHighest PFOA / PFOSTested
South Blount Utility District
serves over 10,000 people
None detected — Feb 2024 – Nov 2024
Knox-Chapman Utility District
serves over 10,000 people
None detected — Jun 2023 – Feb 2024
City of Maryville Water and Sewer Dept
serves over 10,000 people
None detected — Apr 2023 – Jan 2024
Knoxville Utilities Board-Kub
serves over 10,000 people
PFBS — Jan 2024 – Oct 2024
Tuckaleechee Utility District
serves over 10,000 people
None detected — May 2025 – Feb 2026

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Alcoa

Alcoa Water System reported 11,248 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 2,360 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
2,360unknown material (21%)
8,888not lead (79%)

Other water systems serving parts of Alcoa

Water systemService linesTotal
South Blount Utility District0 lead · 0 galvanized · 0 unknown17,698
Knox-Chapman Utility District0 lead · 0 galvanized · 696 unknown15,328
City of Maryville W&S Dept0 lead · 0 galvanized · 2,155 unknown17,721
Knoxville Utilities Board - Kub0 lead · 0 galvanized · 0 unknown95,350
Tuckaleechee Utility District0 lead · 123 galvanized · 0 unknown4,834

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Alcoa drinking water violations

EPA records show 1 health-based violation for Alcoa Water System since 2016, all since resolved or closed. The most recent began in Apr 2017. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Haloacetic acids (HAA5)
byproducts of chlorine disinfection · what it means
highest measured 0.061 MG/L; limit 0.060 mg/L
Contaminant above legal limit 1 Apr 2017 Resolved/closed

Other water systems serving parts of Alcoa

Water systemHealth-based violationsMonitoring/reporting
South Blount Utility District11
Knox-Chapman Utility DistrictNone3
City of Maryville Water and Sewer DeptNone2
Knoxville Utilities Board-KubNone1
Tuckaleechee Utility DistrictNone14

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Alcoa

SiteTypeDistanceMedianSamplesYears
Pistol Creek
Tennessee Department of Environment and Conservation
River/Stream 1 mi194 mg/L102005–2006
Springfield Branch
Tennessee Department of Environment and Conservation
River/Stream 1.7 mi223 mg/L102005–2006
PISTOL CREEK
Tennessee Department of Environment and Conservation
River/Stream 1.8 mi203 mg/L112000–2006
RUSSELL BRANCH
Tennessee Department of Environment and Conservation
River/Stream 2 mi230 mg/L12000
LITTLE CREEK
Tennessee Department of Environment and Conservation
River/Stream 2 mi82 mg/L12000
LITTLE RIVER
Tennessee Department of Environment and Conservation
River/Stream 2.2 mi91 mg/L102007–2008

Water hardness in towns near Alcoa

TownDistanceMedianClass
Maryville4 mi 129 mg/LHard
Knoxville11 mi 166 mg/LHard
Farragut13 mi 170 mg/LHard
Seymour13 mi 130 mg/LHard
Lenoir City17 mi 147 mg/LHard
Oak Ridge21 mi 164 mg/LHard
Clinton22 mi 160 mg/LHard
Sevierville23 mi 190 mg/LVery hard
Athens43 mi 160 mg/LHard
Morristown47 mi 251 mg/LVery hard

Blount County

Alcoa is in Blount County, where the median is 69 mg/L (moderately hard) across 66 sites.

See all of Blount County →

Tennessee

The statewide median is 98 mg/L (moderately hard) from 3,359 sites.

Tennessee hardness map →

Alcoa, TN water: common questions

Do I need a water softener in Alcoa?

Many homes here use one. Water measured around Alcoa is 8.6 gpg (148 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 15,000 grains.Size it for your household →

Who supplies Alcoa's drinking water?

The main public water system serving Alcoa in EPA records is Alcoa Water System. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Alcoa?

It depends on what you want to remove. In Alcoa, the system had 1 health-based violation since 2016, for Total Haloacetic Acids (HAA5); the utility's annual report says what was done about it. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next