Water hardness in Susquehanna County, PA
Water in Susquehanna County is moderately hard, with a median of 63 mg/L (3.7 grains per gallon) across 62 monitoring sites.
Susquehanna County water at a glance
- HardnessModerately hard (63 mg/L, 3.7 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 63 mg/L means at home
- Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
- Dishwasher: set the water hardness to about 3.7 gpg (3.5 °dH), which is a low-to-medium hardness setting.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Susquehanna County
Prefilled with Susquehanna County's measured local hardness of 63 mg/L (3.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Susquehanna County on the Pennsylvania map
Cities and communities in Susquehanna County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Forest City | 35 | Soft | 44 sites within 10 miles |
| Susquehanna Depot | 69 | Moderately hard | 30 sites within 10 miles |
| Montrose | 81 | Moderately hard | 17 sites within 10 miles |
| Hallstead | 84 | Moderately hard | 25 sites within 10 miles |
| New Milford | 83 | Moderately hard | 26 sites within 10 miles |
| Great Bend | 84 | Moderately hard | 25 sites within 10 miles |
| Oakland | 69 | Moderately hard | 29 sites within 10 miles |
| Lanesboro | 69 | Moderately hard | 27 sites within 10 miles |
| Hop Bottom | 53 | Soft | 14 sites within 10 miles |
| Thompson | 59 | Soft | 34 sites within 10 miles |
| Little Meadows | 26 | Soft | 19 sites within 10 miles |
| Union Dale | 34 | Soft | 38 sites within 10 miles |
| Friendsville | 38 | Soft | 30 sites within 10 miles |
| Forest Lake (CDP) | 41 | Soft | 23 sites within 10 miles |
| Harford (CDP) | 82 | Moderately hard | 14 sites within 10 miles |
| Lakeside (CDP) | 73 | Moderately hard | 30 sites within 10 miles |
| Laurel Lake (CDP) | 70 | Moderately hard | 25 sites within 10 miles |
| South Montrose (CDP) | 81 | Moderately hard | 15 sites within 10 miles |
| Springville (CDP) | 74 | Moderately hard | 22 sites within 10 miles |
Neighboring counties
- Wyoming County75 mg/L
- Lackawanna County34 mg/L
- Wayne County51 mg/L
- Bradford County89 mg/L
- Sullivan County38 mg/L
- Luzerne County36 mg/L
Pennsylvania
The statewide median is 82 mg/L (moderately hard) from 4,757 sites.
Pennsylvania hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.