Water hardness in Beaver County, PA
Water in Beaver County is hard, with a median of 148 mg/L (8.7 grains per gallon) across 15 monitoring sites.
Beaver County water at a glance
- HardnessHard (148 mg/L, 8.7 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 148 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.7 gpg (8.3 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Beaver County
Prefilled with Beaver County's measured local hardness of 148 mg/L (8.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Beaver County on the Pennsylvania map
Cities and communities in Beaver County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Aliquippa | 270 | Very hard | 18 sites within 10 miles |
| Economy | 256 | Very hard | 14 sites within 10 miles |
| Beaver Falls | 141 | Hard | 15 sites within 10 miles |
| Ambridge | 342 | Very hard | 35 sites within 10 miles |
| New Brighton | 175 | Hard | 14 sites within 10 miles |
| Monaca | 146 | Hard | 16 sites within 10 miles |
| Beaver | 175 | Hard | 14 sites within 10 miles |
| Baden | 248 | Very hard | 15 sites within 10 miles |
| Rochester | 175 | Hard | 14 sites within 10 miles |
| Ohioville | 340 | Very hard | 3 sites within 10 miles |
| Midland | 342 | Very hard | 7 sites within 10 miles |
| Conway | 203 | Very hard | 13 sites within 10 miles |
| Big Beaver | 140 | Hard | 14 sites within 10 miles |
| Industry | 340 | Very hard | 9 sites within 10 miles |
| Freedom | 146 | Hard | 16 sites within 10 miles |
| West Mayfield | 140 | Hard | 13 sites within 10 miles |
| Bridgewater | 175 | Hard | 14 sites within 10 miles |
| Koppel | 141 | Hard | 15 sites within 10 miles |
| Patterson Heights | 175 | Hard | 14 sites within 10 miles |
| East Rochester | 148 | Hard | 15 sites within 10 miles |
| South Heights | 350 | Very hard | 36 sites within 10 miles |
| New Galilee | 140 | Hard | 14 sites within 10 miles |
| Fallston | 175 | Hard | 14 sites within 10 miles |
| Darlington | 140 | Hard | 10 sites within 10 miles |
| Georgetown | 148 | Hard | county median |
| Eastvale | 141 | Hard | 15 sites within 10 miles |
| Shippingport | 341 | Very hard | 8 sites within 10 miles |
| Hookstown | 350 | Very hard | 6 sites within 10 miles |
| Frankfort Springs | 582 | Very hard | 5 sites within 10 miles |
| Homewood | 140 | Hard | 14 sites within 10 miles |
| Glasgow | 148 | Hard | county median |
| Ambridge Heights (CDP) | 341 | Very hard | 34 sites within 10 miles |
| Hazen (CDP) | 140 | Hard | 14 sites within 10 miles |
| Pine Run (CDP) | 146 | Hard | 16 sites within 10 miles |
| Unionville (CDP) | 140 | Hard | 12 sites within 10 miles |
Water quality in Beaver County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Conway | Borough of Conway | Not tested | 0 lead · 777 unknown | None |
| Freedom | Freedom TWP Water & Sewer | Not tested | 0 lead · 0 unknown | None |
| Glasgow | Glasgow Municipal Water Works | Not tested | Not reported | 1 (1 open) |
| Unionville | Unionville Muni Waterworks | Not tested | 0 lead · 133 unknown | None |
Neighboring counties
- Lawrence County152 mg/L
- Allegheny County248 mg/L
- Butler County84 mg/L
- Washington County174 mg/L
- Mercer County88 mg/L
- Armstrong County102 mg/L
Pennsylvania
The statewide median is 82 mg/L (moderately hard) from 4,757 sites.
Pennsylvania hardness map →Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.