Water hardness in Pike County, PA
Water in Pike County is soft, with a median of 29 mg/L (1.7 grains per gallon) across 170 monitoring sites.
Pike County water at a glance
- HardnessSoft (29 mg/L, 1.7 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 29 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 1.7 gpg (1.6 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Pike County
Prefilled with Pike County's measured local hardness of 29 mg/L (1.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Pike County on the Pennsylvania map
Cities and communities in Pike County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Saw Creek (CDP) | 28 | Soft | 35 sites within 10 miles |
| Hemlock Farms (CDP) | 29 | Soft | 57 sites within 10 miles |
| Pocono Woodland Lakes (CDP) | 35 | Soft | 81 sites within 10 miles |
| Pine Ridge (CDP) | 25 | Soft | 45 sites within 10 miles |
| Matamoras | 23 | Soft | 37 sites within 10 miles |
| Gold Key Lake (CDP) | 33 | Soft | 78 sites within 10 miles |
| Sunrise Lake (CDP) | 33 | Soft | 76 sites within 10 miles |
| Birchwood Lakes (CDP) | 33 | Soft | 65 sites within 10 miles |
| Conashaugh Lakes (CDP) | 44 | Soft | 66 sites within 10 miles |
| Milford | 40 | Soft | 70 sites within 10 miles |
| Pocono Ranch Lands (CDP) | 34 | Soft | 50 sites within 10 miles |
| Pocono Mountain Lake Estates (CDP) | 28 | Soft | 47 sites within 10 miles |
| Fawn Lake Forest (CDP) | 43 | Soft | 63 sites within 10 miles |
| Masthope (CDP) | 42 | Soft | 61 sites within 10 miles |
| Indian Rocks (CDP) | 61 | Moderately hard | 72 sites within 10 miles |
| The Escape (CDP) | 60 | Moderately hard | 73 sites within 10 miles |
Water quality in Pike County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Milford | Milford TWP Water Authority | 2 found | 0 lead · 0 unknown | None |
Neighboring counties
- Monroe County31 mg/L
- Wayne County51 mg/L
- Lackawanna County34 mg/L
- Northampton County79 mg/L
- Carbon County28 mg/L
- Luzerne County36 mg/L
Pennsylvania
The statewide median is 82 mg/L (moderately hard) from 4,757 sites.
Pennsylvania hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.