Water hardness in Morrow County, OR

Water in Morrow County is very hard, with a median of 232 mg/L (13.5 grains per gallon) across 84 monitoring sites.

227% harder than the Oregon median (71 mg/L) 1st hardest of 36 counties
232mg/L
13.5 grains per gallon
Very hard

Morrow County water at a glance

  • HardnessVery hard (232 mg/L, 13.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 232 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13.5 gpg (13 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites84
Lab samples413
Sample years2000–2025
Middle 50% of sites148–405 mg/L
Groundwater (wells, springs)261 mg/L · 78 sites
Surface water (rivers, lakes)64 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Morrow County

Prefilled with Morrow County's measured local hardness of 232 mg/L (13.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Morrow County on the Oregon map

Grant CountyWasco CountyWheeler CountyBaker CountyGilliam CountySherman CountyHarney CountyKlamath CountyWashington CountyLane CountyLake CountyJefferson CountyDeschutes CountyTillamook CountyColumbia CountyLinn CountyCoos CountyJosephine CountyUnion CountyLincoln CountyUmatilla CountyWallowa CountyClackamas CountyCurry CountyMalheur CountyBenton CountyHood River CountyPolk CountyCrook CountyMultnomah CountyYamhill CountyClatsop CountyJackson CountyMarion CountyDouglas County

Cities and communities in Morrow County

PlaceMedian mg/LClassBased on
Boardman 234 Very hard 61 sites within 10 miles
Irrigon 225 Very hard 113 sites within 10 miles
Heppner 232 Very hard county median
Ione 152 Hard 3 sites within 10 miles
Lexington 152 Hard 3 sites within 10 miles

Water quality in Morrow County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Boardman City of Boardman None detected 0 lead · 0 unknown None
Irrigon City of Irrigon Not tested 0 lead · 0 unknown None
Heppner City of Heppner Not tested 0 lead · 0 unknown None
Ione City of Ione Not tested 0 lead · 0 unknown 2
Lexington Town of Lexington Not tested 0 lead · 0 unknown None

Neighboring counties

Oregon

The statewide median is 71 mg/L (moderately hard) from 2,142 sites.

Oregon hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next