Water hardness in Cascade County, MT

Water in Cascade County is hard, with a median of 167 mg/L (9.8 grains per gallon) across 54 monitoring sites.

about the same as the Montana median (157 mg/L) 35th hardest of 56 counties
167mg/L
9.8 grains per gallon
Hard

Cascade County water at a glance

  • HardnessHard (167 mg/L, 9.8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 167 mg/L means at home

  • Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
  • Dishwasher: set the water hardness to about 9.8 gpg (9.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites54
Lab samples836
Sample years2000–2026
Middle 50% of sites150–179 mg/L
Groundwater (wells, springs)224 mg/L · 1 sites
Surface water (rivers, lakes)167 mg/L · 53 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Cascade County

Prefilled with Cascade County's measured local hardness of 167 mg/L (9.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Cascade County on the Montana map

Garfield CountyPowder River CountyFallon CountySweet Grass CountyLewis and Clark CountyRavalli CountyPetroleum CountyMeagher CountyBeaverhead CountyWheatland CountyCuster CountyDaniels CountyFlathead CountyBlaine CountyHill CountyPowell CountyMineral CountySilver Bow CountyMadison CountyGranite CountyCarbon CountyLincoln CountyDawson CountyStillwater CountyMissoula CountyGallatin CountyJudith Basin CountyPrairie CountyTeton CountyBig Horn CountyGlacier CountyValley CountyPark CountyWibaux CountyJefferson CountyBroadwater CountySheridan CountyCarter CountyTreasure CountyYellowstone CountyPondera CountyPhillips CountyRosebud CountyToole CountyFergus CountyMcCone CountyLake CountyMusselshell CountyDeer Lodge CountyChouteau CountyGolden Valley CountySanders CountyRichland CountyLiberty CountyRoosevelt County

Cities and communities in Cascade County

PlaceMedian mg/LClassBased on
Great Falls 168 Hard 19 sites within 10 miles
Malmstrom AFB (CDP) 168 Hard 17 sites within 10 miles
Sun Prairie (CDP) 172 Hard 10 sites within 10 miles
Black Eagle (CDP) 167 Hard 16 sites within 10 miles
Ulm (CDP) 150 Hard 7 sites within 10 miles
Vaughn (CDP) 296 Very hard 4 sites within 10 miles
Cascade 128 Hard 5 sites within 10 miles
Belt 252 Very hard 4 sites within 10 miles
Simms (CDP) 167 Hard county median
Fort Shaw (CDP) 167 Hard county median
Sand Coulee (CDP) 167 Hard 12 sites within 10 miles
Gibson Flats (CDP) 167 Hard 17 sites within 10 miles
Stockett (CDP) 150 Hard 3 sites within 10 miles
Sun River (CDP) 311 Very hard 3 sites within 10 miles
Neihart 47 Soft 9 sites within 10 miles
Big Stone Colony (CDP) 167 Hard 13 sites within 10 miles
Cascade Colony (CDP) 167 Hard county median
Centerville (CDP) 150 Hard 3 sites within 10 miles
Fair Haven Colony (CDP) 142 Hard 5 sites within 10 miles
Hardy (CDP) 115 Moderately hard 9 sites within 10 miles
Monarch (CDP) 167 Hard county median
Pleasant Valley Colony (CDP) 335 Very hard 3 sites within 10 miles
Riceville (CDP) 472 Very hard 4 sites within 10 miles
Tracy (CDP) 167 Hard 14 sites within 10 miles

Water quality in Cascade County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Great Falls City of Great Falls None detected 156 lead · 5,383 unknown 5
Sun Prairie Sun Prairie Water District Not tested Not reported None
Black Eagle Black Eagle Cascade County Water Sewer Not tested 1 lead · 2 unknown 4
Ulm Fairhaven Colony Not tested 0 lead · 0 unknown None
Vaughn Vaughn Cascade County Water and Sewer Not tested 0 lead · 0 unknown None
Cascade Town of Cascade Not tested 0 lead · 1 unknown None
Belt Town of Belt Not tested 0 lead · 97 unknown None
Sand Coulee Sand Coulee Water Users District Not tested Not reported 1
Stockett Stockett Water and Sewer Dist Not tested 0 lead · 49 unknown 1
Sun River Two Buttes Water Users ASSN Not tested 0 lead · 30 unknown None
Neihart Town of Neihart Not tested 0 lead · 2 unknown None
Big Stone Colony Big Stone Colony INC Not tested 0 lead · 0 unknown None
Cascade Colony Cascade Colony Not tested 0 lead · 0 unknown None
Pleasant Valley Colony Pleasant Valley Colony Not tested 0 lead · 0 unknown None

Neighboring counties

Montana

The statewide median is 157 mg/L (hard) from 4,906 sites.

Montana hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next