Water hardness in Van Buren County, IA
Water in Van Buren County is very hard, with a median of 266 mg/L (15.5 grains per gallon) across 1 monitoring site.
Van Buren County water at a glance
- HardnessVery hard (266 mg/L, 15.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 266 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 15.5 gpg (14.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Van Buren County
Prefilled with Van Buren County's measured local hardness of 266 mg/L (15.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Van Buren County on the Iowa map
Cities and communities in Van Buren County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Keosauqua | 266 | Very hard | county median |
| Farmington | 266 | Very hard | county median |
| Milton | 266 | Very hard | county median |
| Birmingham | 266 | Very hard | county median |
| Bonaparte | 266 | Very hard | county median |
| Stockport | 266 | Very hard | county median |
| Cantril | 266 | Very hard | county median |
| Douds (CDP) | 266 | Very hard | county median |
| Leando (CDP) | 266 | Very hard | county median |
| Mount Sterling (CDP) | 266 | Very hard | county median |
Water quality in Van Buren County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Keosauqua | Keosauqua Water Works | Not tested | 0 lead · 8 unknown | None |
| Farmington | Farmington Water Supply | Not tested | 0 lead · 0 unknown | None |
| Milton | Milton Water Supply | Not tested | 3 lead · 0 unknown | None |
| Birmingham | Birmingham Water Supply | Not tested | 0 lead · 0 unknown | None |
| Bonaparte | Bonaparte Water Supply | Not tested | 0 lead · 0 unknown | None |
| Stockport | Stockport Water Supply | Not tested | 0 lead · 0 unknown | None |
| Cantril | Cantril Water Supply | Not tested | 103 lead · 0 unknown | None |
Neighboring counties
- Jefferson County315 mg/L
- Lee County220 mg/L
- Henry County396 mg/L
- Wapello County393 mg/L
- Keokuk County330 mg/L
- Washington County314 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.