Water hardness in Sac County, IA

Water in Sac County is very hard, with a median of 420 mg/L (24.5 grains per gallon) across 5 monitoring sites.

27% harder than the Iowa median (330 mg/L) 16th hardest of 91 counties
420mg/L
24.5 grains per gallon
Very hard

Sac County water at a glance

  • HardnessVery hard (420 mg/L, 24.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 420 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 24.5 gpg (23.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites5
Lab samples11
Sample years2000–2006
Middle 50% of sites420–1200 mg/L
Groundwater (wells, springs)420 mg/L · 5 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Sac County

Prefilled with Sac County's measured local hardness of 420 mg/L (24.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Sac County on the Iowa map

Marshall CountyCherokee CountyMadison CountyGrundy CountyFloyd CountyWright CountyClay CountyAdair CountyClarke CountyMuscatine CountyJones CountyMahaska CountyJohnson CountyStory CountyWapello CountyKossuth CountyJasper CountyMonroe CountyShelby CountyWorth CountyBuena Vista CountyDelaware CountyHamilton CountyJefferson CountyPoweshiek CountyCedar CountyHenry CountyBoone CountyGreene CountyHumboldt CountyBremer CountyOsceola CountyBenton CountyLouisa CountyCerro Gordo CountyPalo Alto CountyMontgomery CountyIda CountyHardin CountyTama CountyTaylor CountyAudubon CountyEmmet CountyLucas CountyChickasaw CountyFranklin CountyUnion CountyIowa CountyCass CountyDavis CountyLinn CountyPolk CountyCrawford CountyMarion CountyScott CountyLee CountyBuchanan CountyWebster CountyWinneshiek CountyClinton CountyDickinson CountyWinnebago CountyHarrison CountyDecatur CountyAdams CountyWoodbury CountyWashington CountyCalhoun CountyRinggold CountyDallas CountyVan Buren CountyBlack Hawk CountyDubuque CountyFayette CountyClayton CountyMills CountySioux CountyWayne CountyMitchell CountyKeokuk CountyPlymouth CountyJackson CountyPottawattamie CountyPocahontas CountyFremont CountyWarren CountyHancock CountyO'Brien CountyAllamakee CountyLyon CountyButler CountyMonona CountyCarroll CountyAppanoose CountyPage CountyHoward CountyDes Moines CountyGuthrie County

Cities and communities in Sac County

PlaceMedian mg/LClassBased on
Sac City 405 Very hard 4 sites within 10 miles
Lake View 625 Very hard 4 sites within 10 miles
Odebolt 420 Very hard county median
Wall Lake 420 Very hard county median
Schaller 410 Very hard 3 sites within 10 miles
Early 420 Very hard 3 sites within 10 miles
Auburn 830 Very hard 3 sites within 10 miles
Nemaha 420 Very hard 3 sites within 10 miles

Water quality in Sac County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Sac City Sac City Municipal Water Plant Not tested 2 lead · 79 unknown None
Lake View Lake View Water Supply Not tested 6 lead · 314 unknown None
Odebolt Odebolt Water Supply Not tested 4 lead · 236 unknown None
Wall Lake Wall Lake Water Supply Not tested 0 lead · 3 unknown None
Schaller Schaller Water Supply Not tested 22 lead · 28 unknown 2
Early Early Municipal Water Supply Not tested 0 lead · 8 unknown 5
Auburn Auburn Water Supply Not tested 1 lead · 3 unknown None

Neighboring counties

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next