Water hardness in Mills County, IA

Water in Mills County is very hard, with a median of 375 mg/L (21.9 grains per gallon) across 6 monitoring sites.

14% harder than the Iowa median (330 mg/L) 32nd hardest of 91 counties
375mg/L
21.9 grains per gallon
Very hard

Mills County water at a glance

  • HardnessVery hard (375 mg/L, 21.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 375 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 21.9 gpg (21 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites6
Lab samples12
Sample years2000–2006
Middle 50% of sites335–445 mg/L
Groundwater (wells, springs)375 mg/L · 6 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Mills County

Prefilled with Mills County's measured local hardness of 375 mg/L (21.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Mills County on the Iowa map

Marshall CountyCherokee CountyMadison CountyGrundy CountyFloyd CountyWright CountyClay CountyAdair CountyClarke CountyMuscatine CountyJones CountyMahaska CountyJohnson CountyStory CountyWapello CountyKossuth CountyJasper CountyMonroe CountyShelby CountyWorth CountyBuena Vista CountyDelaware CountyHamilton CountyJefferson CountyPoweshiek CountyCedar CountyHenry CountyBoone CountyGreene CountyHumboldt CountyBremer CountyOsceola CountyBenton CountyLouisa CountyCerro Gordo CountyPalo Alto CountyMontgomery CountyIda CountyHardin CountyTama CountyTaylor CountyAudubon CountyEmmet CountyLucas CountyChickasaw CountyFranklin CountyUnion CountyIowa CountyCass CountyDavis CountyLinn CountyPolk CountyCrawford CountyMarion CountyScott CountyLee CountyBuchanan CountyWebster CountyWinneshiek CountyClinton CountyDickinson CountyWinnebago CountyHarrison CountyDecatur CountyAdams CountyWoodbury CountyWashington CountyCalhoun CountyRinggold CountyDallas CountyVan Buren CountyBlack Hawk CountyDubuque CountyFayette CountyClayton CountySac CountySioux CountyWayne CountyMitchell CountyKeokuk CountyPlymouth CountyJackson CountyPottawattamie CountyPocahontas CountyFremont CountyWarren CountyHancock CountyO'Brien CountyAllamakee CountyLyon CountyButler CountyMonona CountyCarroll CountyAppanoose CountyPage CountyHoward CountyDes Moines CountyGuthrie County

Cities and communities in Mills County

PlaceMedian mg/LClassBased on
Glenwood 460 Very hard 3 sites within 10 miles
Malvern 340 Very hard 6 sites within 10 miles
Tabor 350 Very hard 3 sites within 10 miles
Emerson 290 Very hard 7 sites within 10 miles
Silver City 375 Very hard 6 sites within 10 miles
Mineola (CDP) 460 Very hard 3 sites within 10 miles
Hastings 350 Very hard 5 sites within 10 miles
Henderson 355 Very hard 4 sites within 10 miles
Pacific Junction 375 Very hard county median

Water quality in Mills County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Glenwood Glenwood Municipal Utilities None detected 9 lead · 583 unknown None
Malvern Malvern Water Supply Not tested 5 lead · 158 unknown 1
Tabor Tabor Water Supply Not tested 0 lead · 169 unknown None
Emerson Emerson Water Department Not tested 4 lead · 85 unknown None
Silver City Silver City Water Supply Not tested 0 lead · 100 unknown None
Hastings Hastings Water Supply Not tested 0 lead · 0 unknown 6
Henderson Henderson Water Department Not tested 0 lead · 0 unknown None
Pacific Junction Pony Creek #1 Hoa Not tested 0 lead · 0 unknown 1

Neighboring counties

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next