Water hardness in Jasper County, IA
Water in Jasper County is very hard, with a median of 348 mg/L (20.3 grains per gallon) across 21 monitoring sites.
Jasper County water at a glance
- HardnessVery hard (348 mg/L, 20.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 348 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 20.3 gpg (19.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Jasper County
Prefilled with Jasper County's measured local hardness of 348 mg/L (20.4 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Jasper County on the Iowa map
Cities and communities in Jasper County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Newton | 346 | Very hard | 16 sites within 10 miles |
| Colfax | 348 | Very hard | 19 sites within 10 miles |
| Monroe | 324 | Very hard | 16 sites within 10 miles |
| Prairie City | 342 | Very hard | 21 sites within 10 miles |
| Baxter | 348 | Very hard | county median |
| Sully | 348 | Very hard | county median |
| Kellogg | 390 | Very hard | 3 sites within 10 miles |
| Lynnville | 348 | Very hard | county median |
| Mingo | 348 | Very hard | 5 sites within 10 miles |
| Oakland Acres | 390 | Very hard | 3 sites within 10 miles |
| Lambs Grove | 346 | Very hard | 18 sites within 10 miles |
| Reasnor | 342 | Very hard | 17 sites within 10 miles |
| Valeria | 324 | Very hard | 6 sites within 10 miles |
Water quality in Jasper County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Newton | Newton Water Supply | None detected | 19 lead · 1,571 unknown | None |
| Colfax | Colfax Water Supply | Not tested | 0 lead · 1 unknown | None |
| Monroe | Monroe Water Supply | Not tested | 2 lead · 42 unknown | None |
| Prairie City | Prairie City Water Works | Not tested | 95 lead · 0 unknown | None |
| Baxter | Baxter Water Supply | Not tested | 0 lead · 0 unknown | None |
| Sully | Sully Muni Water Works | Not tested | 1 lead · 1 unknown | None |
| Kellogg | Kellogg Water Supply | Not tested | 0 lead · 294 unknown | None |
| Lynnville | Lynnville Water Dept | Not tested | 0 lead · 0 unknown | None |
| Mingo | Mingo Water Department | Not tested | 0 lead · 5 unknown | None |
Neighboring counties
- Marion County270 mg/L
- Marshall County358 mg/L
- Polk County299 mg/L
- Poweshiek County438 mg/L
- Story County370 mg/L
- Mahaska County305 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.