Water hardness in Bremer County, IA

Water in Bremer County is very hard, with a median of 246 mg/L (14.4 grains per gallon) across 7 monitoring sites.

25% softer than the Iowa median (330 mg/L) 77th hardest of 91 counties
246mg/L
14.4 grains per gallon
Very hard

Bremer County water at a glance

  • HardnessVery hard (246 mg/L, 14.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 246 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 14.4 gpg (13.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites7
Lab samples26
Sample years2000–2017
Middle 50% of sites179–262 mg/L
Groundwater (wells, springs)222 mg/L · 4 sites
Surface water (rivers, lakes)246 mg/L · 3 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Bremer County

Prefilled with Bremer County's measured local hardness of 246 mg/L (14.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Bremer County on the Iowa map

Marshall CountyCherokee CountyMadison CountyGrundy CountyFloyd CountyWright CountyClay CountyAdair CountyClarke CountyMuscatine CountyJones CountyMahaska CountyJohnson CountyStory CountyWapello CountyKossuth CountyJasper CountyMonroe CountyShelby CountyWorth CountyBuena Vista CountyDelaware CountyHamilton CountyJefferson CountyPoweshiek CountyCedar CountyHenry CountyBoone CountyGreene CountyHumboldt CountyOsceola CountyBenton CountyLouisa CountyCerro Gordo CountyPalo Alto CountyMontgomery CountyIda CountyHardin CountyTama CountyTaylor CountyAudubon CountyEmmet CountyLucas CountyChickasaw CountyFranklin CountyUnion CountyIowa CountyCass CountyDavis CountyLinn CountyPolk CountyCrawford CountyMarion CountyScott CountyLee CountyBuchanan CountyWebster CountyWinneshiek CountyClinton CountyDickinson CountyWinnebago CountyHarrison CountyDecatur CountyAdams CountyWoodbury CountyWashington CountyCalhoun CountyRinggold CountyDallas CountyVan Buren CountyBlack Hawk CountyDubuque CountyFayette CountyClayton CountyMills CountySac CountySioux CountyWayne CountyMitchell CountyKeokuk CountyPlymouth CountyJackson CountyPottawattamie CountyPocahontas CountyFremont CountyWarren CountyHancock CountyO'Brien CountyAllamakee CountyLyon CountyButler CountyMonona CountyCarroll CountyAppanoose CountyPage CountyHoward CountyDes Moines CountyGuthrie County

Cities and communities in Bremer County

PlaceMedian mg/LClassBased on
Waverly 258 Very hard 8 sites within 10 miles
Sumner 190 Very hard 5 sites within 10 miles
Denver 254 Very hard 6 sites within 10 miles
Tripoli 179 Hard 4 sites within 10 miles
Janesville 262 Very hard 11 sites within 10 miles
Readlyn 179 Hard 4 sites within 10 miles
Plainfield 274 Very hard 5 sites within 10 miles
Frederika 210 Very hard 4 sites within 10 miles

Water quality in Bremer County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Waverly Ia Regional Utilities Assoc (Waverly) None detected 0 lead · 6,096 unknown None
Sumner Sumner Water Supply Not tested 0 lead · 319 unknown None
Denver Denver Water Supply Not tested 0 lead · 40 unknown None
Tripoli Tripoli Water Supply Not tested 0 lead · 52 unknown None
Janesville Janesville Water Supply Not tested 6 lead · 33 unknown None
Readlyn Readlyn Water Supply Not tested 0 lead · 0 unknown None
Plainfield Plainfield Water Supply Not tested 0 lead · 0 unknown None

Neighboring counties

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next