Water hardness in O'Brien County, IA

Water in O'Brien County is very hard, with a median of 425 mg/L (24.8 grains per gallon) across 8 monitoring sites.

29% harder than the Iowa median (330 mg/L) 15th hardest of 91 counties
425mg/L
24.8 grains per gallon
Very hard

O'Brien County water at a glance

  • HardnessVery hard (425 mg/L, 24.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 425 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 24.8 gpg (23.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites8
Lab samples12
Sample years2000–2013
Middle 50% of sites408–612 mg/L
Groundwater (wells, springs)425 mg/L · 8 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for O'Brien County

Prefilled with O'Brien County's measured local hardness of 425 mg/L (24.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

O'Brien County on the Iowa map

Marshall CountyCherokee CountyMadison CountyGrundy CountyFloyd CountyWright CountyClay CountyAdair CountyClarke CountyMuscatine CountyJones CountyMahaska CountyJohnson CountyStory CountyWapello CountyKossuth CountyJasper CountyMonroe CountyShelby CountyWorth CountyBuena Vista CountyDelaware CountyHamilton CountyJefferson CountyPoweshiek CountyCedar CountyHenry CountyBoone CountyGreene CountyHumboldt CountyBremer CountyOsceola CountyBenton CountyLouisa CountyCerro Gordo CountyPalo Alto CountyMontgomery CountyIda CountyHardin CountyTama CountyTaylor CountyAudubon CountyEmmet CountyLucas CountyChickasaw CountyFranklin CountyUnion CountyIowa CountyCass CountyDavis CountyLinn CountyPolk CountyCrawford CountyMarion CountyScott CountyLee CountyBuchanan CountyWebster CountyWinneshiek CountyClinton CountyDickinson CountyWinnebago CountyHarrison CountyDecatur CountyAdams CountyWoodbury CountyWashington CountyCalhoun CountyRinggold CountyDallas CountyVan Buren CountyBlack Hawk CountyDubuque CountyFayette CountyClayton CountyMills CountySac CountySioux CountyWayne CountyMitchell CountyKeokuk CountyPlymouth CountyJackson CountyPottawattamie CountyPocahontas CountyFremont CountyWarren CountyHancock CountyAllamakee CountyLyon CountyButler CountyMonona CountyCarroll CountyAppanoose CountyPage CountyHoward CountyDes Moines CountyGuthrie County

Cities and communities in O'Brien County

PlaceMedian mg/LClassBased on
Sheldon 440 Very hard 7 sites within 10 miles
Hartley 425 Very hard county median
Sanborn 425 Very hard 6 sites within 10 miles
Paullina 1,100 Very hard 3 sites within 10 miles
Primghar 440 Very hard 5 sites within 10 miles
Sutherland 550 Very hard 3 sites within 10 miles
Calumet 425 Very hard county median
Archer 410 Very hard 7 sites within 10 miles

Water quality in O'Brien County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Sheldon Sheldon Water Department None detected 1 lead · 481 unknown None
Hartley Hartley Municipal Water Department Not tested 2 lead · 0 unknown None
Sanborn Sanborn Water Supply Not tested 0 lead · 0 unknown None
Paullina Paullina Municipal Water Supply Not tested 37 lead · 531 unknown None
Primghar Primghar Municipal Water Supply Not tested 0 lead · 0 unknown None
Sutherland Sutherland Water Supply Not tested 2 lead · 13 unknown None
Calumet Calumet Water Supply Not tested 0 lead · 0 unknown None

Neighboring counties

Iowa

The statewide median is 330 mg/L (very hard) from 789 sites.

Iowa hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next