Water hardness in Anchorage Municipality, AK

Water in Anchorage Municipality is soft, with a median of 58 mg/L (3.4 grains per gallon) across 16 monitoring sites.

about the same as the Alaska median (68 mg/L) 18th hardest of 25 counties
58mg/L
3.4 grains per gallon
Soft

Anchorage Municipality water at a glance

  • HardnessSoft (58 mg/L, 3.4 gpg, local measurements). A water softener isn't needed.Water heater care →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 58 mg/L means at home

  • Water softener: A water softener is generally not needed. Soft water rarely causes scale.
  • Dishwasher: set the water hardness to about 3.4 gpg (3.2 °dH), which is the lowest hardness setting (or softener off).
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites16
Lab samples144
Sample years2000–2015
Middle 50% of sites42–71 mg/L
Surface water (rivers, lakes)58 mg/L · 16 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Anchorage Municipality

Prefilled with Anchorage Municipality's measured local hardness of 58 mg/L (3.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Anchorage Municipality on the Alaska map

Lake and Peninsula BoroughSkagway MunicipalityKetchikan Gateway BoroughHaines BoroughWrangell City and BoroughHoonah-Angoon Census AreaAleutians West Census AreaBethel Census AreaSoutheast Fairbanks Census AreaKusilvak Census AreaYukon-Koyukuk Census AreaNorth Slope BoroughNome Census AreaSitka City and BoroughPetersburg BoroughBristol Bay BoroughAleutians East BoroughKodiak Island BoroughPrince of Wales-Hyder Census AreaChugach Census AreaCopper River Census AreaDillingham Census AreaKenai Peninsula BoroughNorthwest Arctic BoroughFairbanks North Star BoroughJuneau City and BoroughDenali BoroughMatanuska-Susitna BoroughYakutat City and Borough

Cities and communities in Anchorage Municipality

PlaceMedian mg/LClassBased on
Anchorage 58 Soft county median

Water quality in Anchorage Municipality communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Anchorage Moa Municipality of Anchorage 2 found (PFOA 9.1 / PFOS ND ppt) 0 lead · 15,451 unknown None

Alaska

The statewide median is 68 mg/L (moderately hard) from 280 sites.

Alaska hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next