Water hardness in Shelby County, AL

Water in Shelby County is moderately hard, with a median of 118 mg/L (6.9 grains per gallon) across 58 monitoring sites.

162% harder than the Alabama median (45 mg/L) 4th hardest of 67 counties
118mg/L
6.9 grains per gallon
Moderately hard

Shelby County water at a glance

  • HardnessModerately hard (118 mg/L, 6.9 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 118 mg/L means at home

  • Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
  • Dishwasher: set the water hardness to about 6.9 gpg (6.6 °dH), which is a low-to-medium hardness setting.
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites58
Lab samples907
Sample years2000–2025
Middle 50% of sites56–162 mg/L
Surface water (rivers, lakes)118 mg/L · 58 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Shelby County

Prefilled with Shelby County's measured local hardness of 118 mg/L (6.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Shelby County on the Alabama map

Perry CountyLowndes CountyPike CountyHouston CountyPickens CountyRandolph CountyButler CountyLamar CountyClay CountyCoffee CountyHenry CountyDale CountyBlount CountyColbert CountyCalhoun CountyTallapoosa CountyFayette CountyEtowah CountyConecuh CountyMorgan CountyMonroe CountyLauderdale CountyRussell CountyBaldwin CountyCleburne CountyDallas CountyDeKalb CountyCherokee CountyMacon CountyBibb CountyFranklin CountyLimestone CountyBarbour CountyWalker CountyMarengo CountyElmore CountyChilton CountyWashington CountyMadison CountyCrenshaw CountyLee CountyMontgomery CountyBullock CountyCullman CountyCoosa CountyGeneva CountyEscambia CountyHale CountyWinston CountyClarke CountyJackson CountyJefferson CountyAutauga CountyMobile CountyLawrence CountyTalladega CountyWilcox CountyTuscaloosa CountySt. Clair CountyChambers CountySumter CountyMarshall CountyCovington CountyMarion CountyGreene CountyChoctaw County

Cities and communities in Shelby County

PlaceMedian mg/LClassBased on
Hoover 128 Hard 47 sites within 10 miles
Alabaster 155 Hard 25 sites within 10 miles
Pelham 116 Moderately hard 36 sites within 10 miles
Helena 119 Moderately hard 31 sites within 10 miles
Calera 160 Hard 20 sites within 10 miles
Chelsea 103 Moderately hard 24 sites within 10 miles
Meadowbrook (CDP) 120 Moderately hard 38 sites within 10 miles
Montevallo 159 Hard 20 sites within 10 miles
Brook Highland (CDP) 128 Hard 43 sites within 10 miles
Columbiana 72 Moderately hard 21 sites within 10 miles
Highland Lakes (CDP) 110 Moderately hard 30 sites within 10 miles
Indian Springs Village 114 Moderately hard 39 sites within 10 miles
Wilsonville 84 Moderately hard 23 sites within 10 miles
Westover 84 Moderately hard 14 sites within 10 miles
Harpersville 76 Moderately hard 23 sites within 10 miles
Shoal Creek (CDP) 100 Moderately hard 26 sites within 10 miles
Vandiver (CDP) 100 Moderately hard 17 sites within 10 miles
Shelby (CDP) 75 Moderately hard 19 sites within 10 miles
Dunnavant (CDP) 100 Moderately hard 20 sites within 10 miles
Brantleyville (CDP) 142 Hard 22 sites within 10 miles
Sterrett (CDP) 70 Moderately hard 17 sites within 10 miles
Wilton 156 Hard 16 sites within 10 miles
Eagle Point (CDP) 119 Moderately hard 37 sites within 10 miles
Pea Ridge (CDP) 75 Moderately hard 23 sites within 10 miles

Water quality in Shelby County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Alabaster Alabaster Water Board 8 found (PFOA 21 / PFOS 19 ppt) 0 lead · 0 unknown 1
Pelham Pelham Water Works 7 found (PFOA 11.6 / PFOS 5.6 ppt) 0 lead · 0 unknown None
Helena Helena Utility Board 7 found (PFOA 4 / PFOS 7 ppt) 0 lead · 0 unknown None
Calera Calera Water Works None detected 0 lead · 0 unknown None
Montevallo Montevallo Water Works & Sewer Board 5 found (PFOA ND / PFOS 16.7 ppt) 0 lead · 0 unknown 1 (1 open)
Columbiana Town of Columbiana, the WW Board of the None detected 0 lead · 0 unknown None
Wilsonville Wilsonville Water Works Not tested 0 lead · 1 unknown None
Harpersville Harpersville Water Board Not tested 0 lead · 0 unknown None
Sterrett Sterrett-Vandiver Water System, INC. 7 found (PFOA 21 / PFOS 31 ppt) 0 lead · 0 unknown None
Wilton Wilton Water Works Not tested 0 lead · 8 unknown None

Neighboring counties

Alabama

The statewide median is 45 mg/L (soft) from 2,227 sites.

Alabama hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next