Water hardness in Blount County, AL

Water in Blount County is moderately hard, with a median of 83 mg/L (4.9 grains per gallon) across 35 monitoring sites.

84% harder than the Alabama median (45 mg/L) 12th hardest of 67 counties
83mg/L
4.9 grains per gallon
Moderately hard

Blount County water at a glance

  • HardnessModerately hard (83 mg/L, 4.9 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 83 mg/L means at home

  • Water softener: Most homes do not need a softener. You may notice light spotting on glass and fixtures.
  • Dishwasher: set the water hardness to about 4.9 gpg (4.6 °dH), which is a low-to-medium hardness setting.
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites35
Lab samples310
Sample years2000–2026
Middle 50% of sites56–114 mg/L
Surface water (rivers, lakes)83 mg/L · 35 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Blount County

Prefilled with Blount County's measured local hardness of 83 mg/L (4.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Blount County on the Alabama map

Perry CountyLowndes CountyPike CountyHouston CountyPickens CountyRandolph CountyButler CountyLamar CountyClay CountyCoffee CountyHenry CountyDale CountyColbert CountyCalhoun CountyTallapoosa CountyFayette CountyEtowah CountyConecuh CountyMorgan CountyMonroe CountyLauderdale CountyRussell CountyBaldwin CountyCleburne CountyDallas CountyDeKalb CountyCherokee CountyMacon CountyBibb CountyFranklin CountyLimestone CountyBarbour CountyWalker CountyMarengo CountyElmore CountyChilton CountyWashington CountyMadison CountyCrenshaw CountyLee CountyMontgomery CountyBullock CountyCullman CountyCoosa CountyGeneva CountyShelby CountyEscambia CountyHale CountyWinston CountyClarke CountyJackson CountyJefferson CountyAutauga CountyMobile CountyLawrence CountyTalladega CountyWilcox CountyTuscaloosa CountySt. Clair CountyChambers CountySumter CountyMarshall CountyCovington CountyMarion CountyGreene CountyChoctaw County

Cities and communities in Blount County

PlaceMedian mg/LClassBased on
Oneonta 106 Moderately hard 19 sites within 10 miles
Smoke Rise (CDP) 68 Moderately hard 19 sites within 10 miles
Blountsville 66 Moderately hard 24 sites within 10 miles
Hayden 76 Moderately hard 19 sites within 10 miles
Cleveland 100 Moderately hard 22 sites within 10 miles
Locust Fork 97 Moderately hard 17 sites within 10 miles
Snead 78 Moderately hard 17 sites within 10 miles
Susan Moore 69 Moderately hard 19 sites within 10 miles
Trafford 87 Moderately hard 12 sites within 10 miles
Allgood 102 Moderately hard 21 sites within 10 miles
Highland Lake 102 Moderately hard 19 sites within 10 miles
Nectar 77 Moderately hard 26 sites within 10 miles
Rosa 104 Moderately hard 22 sites within 10 miles
County Line 92 Moderately hard 14 sites within 10 miles
Remlap (CDP) 100 Moderately hard 16 sites within 10 miles

Water quality in Blount County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Oneonta City of Oneonta, UB of the None detected 0 lead · 0 unknown None
Blountsville Town of Blountsville, the UB of the None detected 0 lead · 0 unknown None
Hayden Hayden Water Works Not tested 0 lead · 0 unknown None
Cleveland Cleveland Water Works None detected 0 lead · 0 unknown None
Locust Fork Pine Bluff Water Authority None detected 0 lead · 0 unknown None
Snead Town of Snead Water Works None detected 0 lead · 155 unknown None
Allgood Town of Allgood Water Works Not tested 0 lead · 0 unknown None
Nectar Town of Nectar Not tested 0 lead · 0 unknown None
Remlap Remlap Pine MTN Water Authority Not tested 0 lead · 0 unknown None

Neighboring counties

Alabama

The statewide median is 45 mg/L (soft) from 2,227 sites.

Alabama hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next