Water hardness in Waco, TX
Water in Waco is hard, with a median of 150 mg/L (8.8 grains per gallon) across 12 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Waco can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Waco tap water at a glance
- HardnessHard (150 mg/L, 8.8 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- PFAS1 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 150 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.8 gpg (8.4 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Waco
Prefilled with Waco's measured local hardness of 150 mg/L (8.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Waco tap water
City of Waco is the main public water system for Waco. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Oct 2023 – Jul 2024. 1 PFAS was detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 7.6 ppt | 4 of 8 samples | — |
Other water systems serving parts of Waco
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| City of Bellmead serves over 10,000 people | None detected | — | Apr 2023 – Nov 2023 |
| City of Robinson serves over 10,000 people | PFBA, PFHxS, PFPeA +2 more | — | Jul 2023 – Apr 2024 |
| City of Hewitt serves over 10,000 people | PFBA | — | Jan 2023 – Oct 2023 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Waco
City of Waco reported 51,551 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 400 are galvanized lines that must be replaced.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Waco whether your address is on its list.
Other water systems serving parts of Waco
| Water system | Service lines | Total |
|---|---|---|
| City of Bellmead | 0 lead · 2,864 galvanized · 0 unknown | 3,713 |
| City of Robinson | 0 lead · 0 galvanized · 0 unknown | 5,177 |
| City of Hewitt | 2 lead · 0 galvanized · 0 unknown | 6,088 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Waco drinking water violations
EPA records show no health-based violations for City of Waco since 2016.
Other water systems serving parts of Waco
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| City of Bellmead | 2 | 19 |
| City of Robinson | 1 | 1 |
| City of Hewitt | None | 2 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Waco
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Waco Lk Site AC nr Waco, TX USGS Texas Water Science Center | Lake, Reservoir, Impoundment | 1.2 mi | 149 mg/L | 54 | 2000–2008 |
| WACO LAKE USGS SITE AC Texas Commission on Environmental Quality | Reservoir | 1.2 mi | 150 mg/L | 30 | 2002–2006 |
| LK WACO SW OF DAM OUTLET Texas Commission on Environmental Quality | Reservoir | 1.4 mi | 150 mg/L | 1 | 2001 |
| Bosque Rv nr Waco, TX USGS Texas Water Science Center | Stream | 3 mi | 154 mg/L | 27 | 2000–2008 |
| BOSQUE RIVER NR FM1673/N 19TH Texas Commission on Environmental Quality | River/Stream | 3 mi | 150 mg/L | 7 | 2002–2004 |
| WACO LAKE AT WEST SH 6 BRIDGE Texas Commission on Environmental Quality | Reservoir | 3.3 mi | 155 mg/L | 30 | 2002–2006 |
Water hardness in towns near Waco
| Town | Distance | Median | Class |
|---|---|---|---|
| Bellmead | 7 mi | 150 mg/L | Hard |
| Hewitt | 7 mi | 150 mg/L | Hard |
| Robinson | 8 mi | 150 mg/L | Hard |
| Temple | 34 mi | 285 mg/L | Very hard |
| Gatesville | 34 mi | 311 mg/L | Very hard |
| Belton | 39 mi | 287 mg/L | Very hard |
| Harker Heights | 44 mi | 291 mg/L | Very hard |
| Fort Hood | 46 mi | 311 mg/L | Very hard |
| Killeen | 46 mi | 220 mg/L | Very hard |
| Copperas Cove | 52 mi | 311 mg/L | Very hard |
McLennan County
Waco is in McLennan County, where the median is 150 mg/L (hard) across 15 sites.
See all of McLennan County →Waco, TX water: common questions
Do I need a water softener in Waco?
Many homes here use one. Water measured around Waco is 8.8 gpg (150 mg/L, measured locally), above the 7 gpg (120 mg/L) level where scale on fixtures, appliances and water heaters becomes noticeable. For a 3-person home that regenerates weekly, that means a softener of about 16,000 grains.Size it for your household →
Who supplies Waco's drinking water?
The main public water system serving Waco in EPA records is City of Waco. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Waco?
It depends on what you want to remove. In Waco, EPA testing found PFBA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 1 PFAS in Waco's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.