Water hardness in Killeen, TX
Water in Killeen is very hard, with a median of 220 mg/L (12.8 grains per gallon) across 3 monitoring sites within 10 miles.
Large city utilities sometimes soften, blend or import water from distant reservoirs, so tap water in Killeen can differ from local source water. Your utility's annual Consumer Confidence Report lists the exact tap value.
Killeen tap water at a glance
- HardnessVery hard (220 mg/L, 12.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFAS3 found in EPA testing; every result with a federal limit was at or below it.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 220 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.8 gpg (12.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Killeen
Prefilled with Killeen's measured local hardness of 220 mg/L (12.9 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Killeen tap water
City of Killeen is the main public water system for Killeen. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Mar 2025 – Dec 2025. 3 PFAS were detected.
| Chemical | Highest result | Detected in | EPA limit |
|---|---|---|---|
| PFBA perfluorobutanoic acid | 7.3 ppt | 4 of 8 samples | — |
| PFPeA perfluoropentanoic acid | 3.5 ppt | 3 of 8 samples | — |
| PFBS perfluorobutane sulfonic acid | 3 ppt | 1 of 8 samples | — |
Other water systems serving parts of Killeen
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Kempner WSC serves over 10,000 people | PFBA, PFBS, PFPeA | — | May 2024 – May 2025 |
| City of Harker Heights serves over 10,000 people | PFBA, PFHxS, PFBS | — | Mar 2023 – May 2024 |
| US ARMY South Fort Hood serves over 10,000 people | PFBA, PFHxS, PFPeA +1 more | — | Nov 2023 – Aug 2024 |
| City of Georgetown serves over 10,000 people | PFBA, PFPeA, PFHxA +4 more | 4.9 / 5.7 ppt | Jun 2023 – Feb 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Killeen
City of Killeen reported 56,364 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 2,426 are galvanized lines that must be replaced.
EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask City of Killeen whether your address is on its list.
Other water systems serving parts of Killeen
| Water system | Service lines | Total |
|---|---|---|
| Kempner WSC | 0 lead · 0 galvanized · 0 unknown | 5,797 |
| City of Harker Heights | 0 lead · 105 galvanized · 2,852 unknown | 12,878 |
| US ARMY South Fort Cavazos | 0 lead · 0 galvanized · 0 unknown | 7,041 |
| City of Georgetown | 0 lead · 161 galvanized · 4 unknown | 62,099 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Killeen drinking water violations
EPA records show no health-based violations for City of Killeen since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Killeen
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Kempner WSC | 9 | 3 |
| City of Harker Heights | None | 1 |
| US ARMY South Fort Hood | None | 0 |
| City of Georgetown | 1 | 2 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Killeen
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| AX-40-58-903 (CUWCD E-06-063P) USGS Texas Water Science Center | Well | 4 mi | 220 mg/L | 2 | 2021 |
| AX-40-58-201 USGS Texas Water Science Center | Well | 5.6 mi | 640 mg/L | 1 | 2015 |
| AX-58-02-304 (CUWCD M-19-002P) USGS Texas Water Science Center | Well | 8.5 mi | 21 mg/L | 2 | 2021 |
Water hardness in towns near Killeen
| Town | Distance | Median | Class |
|---|---|---|---|
| Fort Hood | 5 mi | 311 mg/L | Very hard |
| Harker Heights | 5 mi | 291 mg/L | Very hard |
| Copperas Cove | 11 mi | 311 mg/L | Very hard |
| Belton | 15 mi | 287 mg/L | Very hard |
| Temple | 20 mi | 285 mg/L | Very hard |
| Gatesville | 25 mi | 311 mg/L | Very hard |
| Georgetown | 28 mi | 326 mg/L | Very hard |
| Liberty Hill | 30 mi | 322 mg/L | Very hard |
| Leander | 36 mi | 340 mg/L | Very hard |
| Round Rock | 38 mi | 366 mg/L | Very hard |
Bell County
Killeen is in Bell County, where the median is 285 mg/L (very hard) across 18 sites.
See all of Bell County →Killeen, TX water: common questions
Do I need a water softener in Killeen?
Very likely. Water measured around Killeen is 12.8 gpg (220 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →
Who supplies Killeen's drinking water?
The main public water system serving Killeen in EPA records is City of Killeen. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Killeen?
It depends on what you want to remove. In Killeen, EPA testing found PFBA, PFPeA and PFBS in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Which water filters remove PFAS?EPA tests found 3 PFAS in Killeen's main water system.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.