Water hardness in Liberty Hill, TX
Water in Liberty Hill is very hard, with a median of 322 mg/L (18.8 grains per gallon) across Williamson County.
There are not enough monitoring sites within 10 miles of Liberty Hill, so this page uses the Williamson County median.
Liberty Hill tap water at a glance
- HardnessVery hard (322 mg/L, 18.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 322 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 18.8 gpg (18 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Liberty Hill
Prefilled with Liberty Hill's measured local hardness of 322 mg/L (18.8 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Liberty Hill tap water
Liberty Hill is served by more than one water system. These systems supply ZIP codes in Liberty Hill and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.
Water systems serving Liberty Hill
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| City of Georgetown serves over 10,000 people | PFBA, PFPeA, PFHxA +4 more | 4.9 / 5.7 ppt | Jun 2023 – Feb 2025 |
| City of Leander serves over 10,000 people | PFBA | — | May 2024 – May 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Liberty Hill
Liberty Hill is served by more than one water system. Their service line inventories, as reported to EPA:
Water systems serving Liberty Hill
| Water system | Service lines | Total |
|---|---|---|
| City of Georgetown | 0 lead · 161 galvanized · 4 unknown | 62,099 |
| City of Leander | 0 lead · 0 galvanized · 6,716 unknown | 26,978 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Liberty Hill drinking water violations
Liberty Hill is served by more than one water system. Health-based violations recorded by EPA since 2016:
Water systems serving Liberty Hill
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| City of Georgetown | 1 | 2 |
| City of Leander | None | 10 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Liberty Hill
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| ZK-58-18-605 USGS Texas Water Science Center | Well | 9 mi | 263 mg/L | 4 | 2007–2011 |
Water hardness in towns near Liberty Hill
| Town | Distance | Median | Class |
|---|---|---|---|
| Leander | 7 mi | 340 mg/L | Very hard |
| Cedar Park | 12 mi | 351 mg/L | Very hard |
| Georgetown | 12 mi | 326 mg/L | Very hard |
| Brushy Creek | 14 mi | 356 mg/L | Very hard |
| Lago Vista | 15 mi | 254 mg/L | Very hard |
| Round Rock | 17 mi | 366 mg/L | Very hard |
| Wells Branch | 20 mi | 370 mg/L | Very hard |
| Lakeway | 22 mi | 206 mg/L | Very hard |
| Hutto | 23 mi | 332 mg/L | Very hard |
| Pflugerville | 23 mi | 332 mg/L | Very hard |
Williamson County
Liberty Hill is in Williamson County, where the median is 322 mg/L (very hard) across 20 sites.
See all of Williamson County →Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.