Water hardness in Johnson City, TN
Water in Johnson City is very hard, with a median of 222 mg/L (12.9 grains per gallon) across 74 monitoring sites within 10 miles.
Johnson City tap water at a glance
- HardnessVery hard (222 mg/L, 12.9 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo known lead lines; 22,270 lines are still of unknown material.Check your own pipe →
- ViolationsNo health-based violations since 2016.EPA record →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 222 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 12.9 gpg (12.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Johnson City
Prefilled with Johnson City's measured local hardness of 222 mg/L (13 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Johnson City tap water
Johnson City Water Dept is the main public water system for Johnson City. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Dec 2023 – Sep 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Johnson City
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Kingsport Water Dept serves over 10,000 people | PFOS | ND / 5.9 ppt | Feb 2023 – Nov 2023 |
| Chuckey Utility District serves over 10,000 people | 6:2 FTS | — | Jan 2023 – Nov 2023 |
| Jonesborough Water Dept serves over 10,000 people | None detected | — | Jan 2025 – May 2026 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Johnson City
Johnson City Water Dept reported 46,701 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 22,270 lines are still of unknown material.
Other water systems serving parts of Johnson City
| Water system | Service lines | Total |
|---|---|---|
| Kingsport Water Dept | 0 lead · 0 galvanized · 27,457 unknown | 38,574 |
| Chuckey Utility District | 0 lead · 0 galvanized · 0 unknown | 5,866 |
| Jonesborough Water Dept | 0 lead · 0 galvanized · 0 unknown | 12,941 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Johnson City drinking water violations
EPA records show no health-based violations for Johnson City Water Dept since 2016. It also had 5 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
Other water systems serving parts of Johnson City
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Kingsport Water Dept | None | 1 |
| Chuckey Utility District | None | 1 |
| Jonesborough Water Dept | 5 | 1 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Johnson City
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| Field Blank For JCEFO TDEC Division of Water Resources | Other-Surface Water | 1.1 mi | 0 mg/L | 2 | 2013 |
| Knob Creek Tennessee Department of Environment and Conservation | River/Stream | 1.3 mi | 278 mg/L | 18 | 2001–2007 |
| Knob Creek Tennessee Department of Environment and Conservation | River/Stream | 1.7 mi | 278 mg/L | 22 | 2001–2007 |
| Brush Creek Tennessee Department of Environment and Conservation | River/Stream | 2.5 mi | 248 mg/L | 2 | 2001–2002 |
| Knob Creek Tennessee Department of Environment and Conservation | River/Stream | 2.7 mi | 266 mg/L | 25 | 2001–2007 |
| Brush Creek Tennessee Department of Environment and Conservation | River/Stream | 2.7 mi | 251 mg/L | 4 | 2001–2002 |
Water hardness in towns near Johnson City
| Town | Distance | Median | Class |
|---|---|---|---|
| Elizabethton | 8 mi | 87 mg/L | Moderately hard |
| Kingsport | 15 mi | 242 mg/L | Very hard |
| Bristol | 17 mi | 241 mg/L | Very hard |
| Greeneville | 27 mi | 252 mg/L | Very hard |
| Morristown | 52 mi | 251 mg/L | Very hard |
| Sevierville | 74 mi | 190 mg/L | Very hard |
| Seymour | 83 mi | 130 mg/L | Hard |
| Knoxville | 91 mi | 166 mg/L | Hard |
| Alcoa | 96 mi | 148 mg/L | Hard |
| Maryville | 98 mi | 129 mg/L | Hard |
Washington County
Johnson City is in Washington County, where the median is 248 mg/L (very hard) across 57 sites.
See all of Washington County →Tennessee
The statewide median is 98 mg/L (moderately hard) from 3,359 sites.
Tennessee hardness map →Johnson City, TN water: common questions
Do I need a water softener in Johnson City?
Very likely. Water measured around Johnson City is 12.9 gpg (222 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 23,000 grains.Size it for your household →
Who supplies Johnson City's drinking water?
The main public water system serving Johnson City in EPA records is Johnson City Water Dept. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Johnson City?
Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- How to tell if your home has a lead pipe22,270 service lines here are of unknown material.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.