Water hardness in Oglala Lakota County, SD

Water in Oglala Lakota County is very hard, with a median of 308 mg/L (18 grains per gallon) across 1 monitoring site.

25% softer than the South Dakota median (410 mg/L) 36th hardest of 54 counties
308mg/L
18 grains per gallon
Very hard

Oglala Lakota County water at a glance

  • HardnessVery hard (308 mg/L, 18 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 308 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 18 gpg (17.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites1
Lab samples19
Sample years2000–2010
Middle 50% of sites308–308 mg/L
Surface water (rivers, lakes)308 mg/L · 1 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Oglala Lakota County

Prefilled with Oglala Lakota County's measured local hardness of 308 mg/L (18 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Oglala Lakota County on the South Dakota map

Moody CountyAurora CountyDavison CountyTurner CountyDay CountyFall River CountyBrule CountyMcCook CountyMiner CountyGrant CountyBrown CountyBeadle CountyBrookings CountyClark CountySpink CountyHamlin CountyKingsbury CountyBuffalo CountyEdmunds CountyJerauld CountyHyde CountyDouglas CountySanborn CountyDeuel CountyHutchinson CountyHand CountyLyman CountySully CountyPotter CountyLake CountyHarding CountyHanson CountyUnion CountyCorson CountyYankton CountyGregory CountyCharles Mix CountyMarshall CountyClay CountyLawrence CountyHaakon CountyBon Homme CountyPennington CountyMinnehaha CountyDewey CountyCuster CountyMellette CountyMeade CountyFaulk CountyWalworth CountyTodd CountyButte CountyBennett CountyCodington CountyHughes CountyStanley CountyZiebach CountyRoberts CountyMcPherson CountyLincoln CountyJones CountyPerkins CountyJackson CountyTripp CountyCampbell County

Cities and communities in Oglala Lakota County

PlaceMedian mg/LClassBased on
Pine Ridge (CDP) 308 Very hard county median
Oglala (CDP) 308 Very hard county median
Porcupine (CDP) 308 Very hard county median
Kyle (CDP) 308 Very hard county median
Manderson-White Horse Creek (CDP) 308 Very hard county median
Wounded Knee (CDP) 308 Very hard county median
Batesland 308 Very hard county median

Water quality in Oglala Lakota County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Batesland Batesland Not tested 0 lead · 41 unknown 1

Neighboring counties

South Dakota

The statewide median is 410 mg/L (very hard) from 498 sites.

South Dakota hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next