Water hardness in Custer County, SD

Water in Custer County is very hard, with a median of 233 mg/L (13.6 grains per gallon) across 65 monitoring sites.

43% softer than the South Dakota median (410 mg/L) 43rd hardest of 54 counties
233mg/L
13.6 grains per gallon
Very hard

Custer County water at a glance

  • HardnessVery hard (233 mg/L, 13.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 233 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 13.6 gpg (13.1 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites65
Lab samples231
Sample years2000–2021
Middle 50% of sites182–312 mg/L
Groundwater (wells, springs)232 mg/L · 52 sites
Surface water (rivers, lakes)233 mg/L · 13 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Custer County

Prefilled with Custer County's measured local hardness of 233 mg/L (13.6 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Custer County on the South Dakota map

Moody CountyAurora CountyDavison CountyTurner CountyDay CountyFall River CountyBrule CountyMcCook CountyMiner CountyGrant CountyBrown CountyBeadle CountyBrookings CountyClark CountySpink CountyHamlin CountyKingsbury CountyBuffalo CountyEdmunds CountyJerauld CountyHyde CountyDouglas CountySanborn CountyDeuel CountyHutchinson CountyHand CountyLyman CountySully CountyPotter CountyLake CountyHarding CountyHanson CountyUnion CountyCorson CountyYankton CountyGregory CountyCharles Mix CountyMarshall CountyClay CountyLawrence CountyHaakon CountyBon Homme CountyPennington CountyMinnehaha CountyDewey CountyMellette CountyMeade CountyFaulk CountyWalworth CountyTodd CountyButte CountyBennett CountyCodington CountyHughes CountyStanley CountyZiebach CountyRoberts CountyMcPherson CountyLincoln CountyJones CountyOglala Lakota CountyPerkins CountyJackson CountyTripp CountyCampbell County

Cities and communities in Custer County

PlaceMedian mg/LClassBased on
Custer 176 Hard 10 sites within 10 miles
Hermosa 233 Very hard county median
Buffalo Gap 224 Very hard 30 sites within 10 miles
Pringle 221 Very hard 42 sites within 10 miles
Fairburn 233 Very hard county median

Water quality in Custer County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Custer Custer Not tested 0 lead · 0 unknown None
Hermosa Hermosa-OLD System Not tested 0 lead · 99 unknown None
Buffalo Gap Buffalo Gap Not tested 38 lead · 0 unknown 6
Fairburn Fairburn Water Association Not tested 0 lead · 0 unknown 3 (1 open)

Neighboring counties

South Dakota

The statewide median is 410 mg/L (very hard) from 498 sites.

South Dakota hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next