Water hardness in Kershaw County, SC
Water in Kershaw County is soft, with a median of 12 mg/L (0.7 grains per gallon) across 44 monitoring sites.
Kershaw County water at a glance
- HardnessSoft (12 mg/L, 0.7 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 12 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 0.7 gpg (0.7 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Kershaw County
Prefilled with Kershaw County's measured local hardness of 12 mg/L (0.7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Kershaw County on the South Carolina map
Cities and communities in Kershaw County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Camden | 10 | Soft | 16 sites within 10 miles |
| Lugoff (CDP) | 10 | Soft | 19 sites within 10 miles |
| Elgin | 7 | Soft | 20 sites within 10 miles |
| Bethune | 10 | Soft | 6 sites within 10 miles |
| Boykin (CDP) | 6 | Soft | 11 sites within 10 miles |
| Abney Crossroads (CDP) | 14 | Soft | 20 sites within 10 miles |
| East Camden (CDP) | 8 | Soft | 13 sites within 10 miles |
Water quality in Kershaw County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Camden | City of Camden | 4 found (PFOA 5.2 / PFOS 4.7 ppt) | 0 lead · 0 unknown | None |
| Lugoff | Lugoff Elgin Water Auth | 5 found (PFOA 7.1 / PFOS 9.3 ppt) | 0 lead · 0 unknown | None |
| Elgin | Percival Estates MHP | Not tested | 0 lead · 0 unknown | 1 |
| Bethune | Bethune Rural Water | Not tested | 0 lead · 6 unknown | None |
Neighboring counties
- Lee County14 mg/L
- Lancaster County27 mg/L
- Richland County12 mg/L
- Fairfield County26 mg/L
- Sumter County16 mg/L
- Chesterfield County8 mg/L
South Carolina
The statewide median is 18 mg/L (soft) from 2,209 sites.
South Carolina hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.