Water hardness in Hampton County, SC
Water in Hampton County is soft, with a median of 34 mg/L (2 grains per gallon) across 23 monitoring sites.
Hampton County water at a glance
- HardnessSoft (34 mg/L, 2 gpg, local measurements). A water softener isn't needed.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 34 mg/L means at home
- Water softener: A water softener is generally not needed. Soft water rarely causes scale.
- Dishwasher: set the water hardness to about 2 gpg (1.9 °dH), which is the lowest hardness setting (or softener off).
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Hampton County
Prefilled with Hampton County's measured local hardness of 34 mg/L (2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Hampton County on the South Carolina map
Cities and communities in Hampton County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Hampton | 29 | Soft | 24 sites within 10 miles |
| Estill | 26 | Soft | 12 sites within 10 miles |
| Varnville | 25 | Soft | 20 sites within 10 miles |
| Yemassee | 27 | Soft | 9 sites within 10 miles |
| Brunson | 30 | Soft | 26 sites within 10 miles |
| Gifford | 32 | Soft | 24 sites within 10 miles |
| Furman | 120 | Moderately hard | 6 sites within 10 miles |
| Scotia | 118 | Moderately hard | 4 sites within 10 miles |
| Luray | 32 | Soft | 18 sites within 10 miles |
Water quality in Hampton County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Hampton | Town of Hampton | Not tested | 0 lead · 1,211 unknown | None |
| Estill | Town of Estill | Not tested | 0 lead · 285 unknown | None |
| Varnville | Town of Varnville | Not tested | 0 lead · 630 unknown | None |
| Yemassee | Town of Yemassee | Not tested | 0 lead · 307 unknown | None |
| Brunson | Town of Brunson | Not tested | 0 lead · 171 unknown | None |
| Gifford | Town of Gifford | Not tested | 0 lead · 0 unknown | None |
| Furman | Town of Furman | Not tested | 0 lead · 0 unknown | None |
| Scotia | Town of Scotia | Not tested | 0 lead · 66 unknown | None |
Neighboring counties
- Allendale County30 mg/L
- Jasper County103 mg/L
- Colleton County21 mg/L
- Bamberg County35 mg/L
- Barnwell County21 mg/L
- Beaufort County98 mg/L
South Carolina
The statewide median is 18 mg/L (soft) from 2,209 sites.
South Carolina hardness map →Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.