Water hardness in Elk City, OK

Water in Elk City is very hard, with a median of 702 mg/L (41 grains per gallon) across Beckham County.

204% harder than the Oklahoma median (231 mg/L) 3rd hardest of 45 Oklahoma towns Population 11,279
702mg/L
41 grains per gallon
Very hard

There are not enough monitoring sites within 10 miles of Elk City, so this page uses the Beckham County median.

Elk City tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 702 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 41 gpg (39.3 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites25
Lab samples202
Sample years2000–2025
Middle 50% of sites486–910 mg/L
Surface water (rivers, lakes)702 mg/L · 25 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Elk City

Prefilled with Elk City's measured local hardness of 702 mg/L (41.1 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Elk City tap water

The City of Elk City water system is the main public water system for Elk City. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 2 samples taken Jun 2023 – Dec 2023. No PFAS were found at or above EPA's minimum reporting levels.

Other water systems serving parts of Elk City

Water systemPFAS detectedHighest PFOA / PFOSTested
Sayre
serves 10,000 people or fewer
None detected — Jan 2024 – Jul 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Elk City

The City of Elk City water system reported 18,240 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 18,240 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
18,240unknown material (100%)
0not lead (0%)

Other water systems serving parts of Elk City

Water systemService linesTotal
Sayre0 lead · 8 galvanized · 1,568 unknown1,667

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Elk City drinking water violations

EPA records show no health-based violations for the City of Elk City water system since 2016. It also had 4 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Elk City

Water systemHealth-based violationsMonitoring/reporting
SayreNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Elk City

SiteTypeDistanceMedianSamplesYears
Timber Creek
Oklahoma Conservation Commission (State)
River/Stream 9.2 mi430 mg/L12009
Timber Creek
Oklahoma Conservation Commission (State)
River/Stream 9.2 mi430 mg/L12009

Water hardness in towns near Elk City

TownDistanceMedianClass
Weatherford43 mi 670 mg/LVery hard
Altus51 mi 1355 mg/LVery hard
Woodward72 mi 160 mg/LHard
Lawton78 mi 235 mg/LVery hard
El Reno83 mi 469 mg/LVery hard
Chickasha87 mi 770 mg/LVery hard
Yukon94 mi 378 mg/LVery hard
Mustang96 mi 261 mg/LVery hard
Bethany101 mi 370 mg/LVery hard
Warr Acres102 mi 363 mg/LVery hard

Beckham County

Elk City is in Beckham County, where the median is 702 mg/L (very hard) across 25 sites.

See all of Beckham County →

Oklahoma

The statewide median is 231 mg/L (very hard) from 1,773 sites.

Oklahoma hardness map →

Elk City, OK water: common questions

Do I need a water softener in Elk City?

Very likely. Water measured around Elk City is 41 gpg (702 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 71,000 grains.Size it for your household →

Who supplies Elk City's drinking water?

The main public water system serving Elk City in EPA records is ELK City. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Elk City?

Not for anything in EPA's records: no PFAS found in EPA testing, no lead service lines reported and no health-based violations since 2016. People here who use a filter usually do it for taste, such as chlorine.Chlorine taste in tap water →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next