Water hardness in Kings Mountain, NC

Water in Kings Mountain is soft, with a median of 35 mg/L (2 grains per gallon) across 4 monitoring sites within 10 miles.

about the same as the North Carolina median (33 mg/L) 48th hardest of 92 North Carolina towns Population 11,823
35mg/L
2 grains per gallon
Soft

Kings Mountain tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 35 mg/L means at home

  • Water softener: A water softener is generally not needed. Soft water rarely causes scale.
  • Dishwasher: set the water hardness to about 2 gpg (2 °dH), which is the lowest hardness setting (or softener off).
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites4
Lab samples56
Sample years2000–2025
Middle 50% of sites26–42 mg/L
Surface water (rivers, lakes)35 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Kings Mountain

Prefilled with Kings Mountain's measured local hardness of 35 mg/L (2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Kings Mountain tap water

Town of Kings Mountain is the main public water system for Kings Mountain. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Mar 2024 – Dec 2024. 2 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFHxA
perfluorohexanoic acid
6.8 ppt 4 of 4 samples —
PFPeA
perfluoropentanoic acid
5.3 ppt 4 of 4 samples —

Other water systems serving parts of Kings Mountain

Water systemPFAS detectedHighest PFOA / PFOSTested
Cleveland County Water
serves over 10,000 people
None detected — Feb 2023 – Jan 2024
City of Shelby
serves over 10,000 people
None detected — Feb 2024 – Nov 2024
Two Rivers Utilities
serves over 10,000 people
None detected — Oct 2023 – Jul 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Kings Mountain

Town of Kings Mountain reported 5,371 service lines (the pipes connecting homes to the water main) in its inventory. 0 are lead and 113 are galvanized lines that must be replaced.

0lead (0%)
113galvanized requiring replacement
0unknown material (0%)
5,258not lead (98%)

EPA's 2024 lead rule requires most water systems to replace these lines within 10 years, starting in November 2027 (the rule is being challenged in court). Ask Town of Kings Mountain whether your address is on its list.

Other water systems serving parts of Kings Mountain

Water systemService linesTotal
Cleveland County Water0 lead · 0 galvanized · 0 unknown25,998
City of Shelby0 lead · 0 galvanized · 0 unknown6,357
Two Rivers Utilities0 lead · 2 galvanized · 22,226 unknown34,568

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Kings Mountain drinking water violations

EPA records show 2 health-based violations for Town of Kings Mountain since 2016, all since resolved or closed. The most recent began in Apr 2025. It also had 1 monitoring or reporting violation (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Contaminant or ruleTypeViolationsMost recentStatus
Total trihalomethanes (TTHM)
byproducts formed when chlorine reacts with natural matter in water · what it means
highest measured 0.085 MG/L; limit 0.080 mg/L
Contaminant above legal limit 2 Apr 2025 Resolved/closed

Other water systems serving parts of Kings Mountain

Water systemHealth-based violationsMonitoring/reporting
Cleveland County WaterNone1
City of ShelbyNone1
Two Rivers UtilitiesNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Kings Mountain

SiteTypeDistanceMedianSamplesYears
BESSEMER CITY LAKE
North Carolina Dept of Environmental Quality NCDEQ-DWR WQX
Lake 5.1 mi28 mg/L102012–2017
KINGS MOUNTAIN RESERVOIR
North Carolina Dept of Environmental Quality NCDEQ-DWR WQX
Lake 6.6 mi19 mg/L182010–2025
LONG CRK AT SR 1456 NR BESSEMER CITY
NCDENR-DWQ (2nd)
River/Stream 8.2 mi43 mg/L112000–2001
LONG CRK AT SR 1456 NR BESSEMER CITY
North Carolina Dept of Environmental Quality NCDEQ-DWR WQX
River/Stream 8.2 mi41 mg/L172010–2025

Water hardness in towns near Kings Mountain

TownDistanceMedianClass
Gastonia9 mi 34 mg/LSoft
Shelby12 mi 24 mg/LSoft
Belmont17 mi 24 mg/LSoft
Lincolnton18 mi 32 mg/LSoft
Mount Holly20 mi 29 mg/LSoft
Pineville28 mi 66 mg/LModerately hard
Charlotte29 mi 39 mg/LSoft
Huntersville30 mi 28 mg/LSoft
Newton30 mi 15 mg/LSoft
Cornelius31 mi 23 mg/LSoft

Gaston County

Kings Mountain is in Gaston County, where the median is 27 mg/L (soft) across 14 sites.

See all of Gaston County →

North Carolina

The statewide median is 33 mg/L (soft) from 1,749 sites.

North Carolina hardness map →

Kings Mountain, NC water: common questions

Do I need a water softener in Kings Mountain?

Probably not. Water measured around Kings Mountain is 2 gpg (35 mg/L, measured locally), under the 7 gpg (120 mg/L) level where scale on fixtures and appliances becomes noticeable.When a softener helps →

Who supplies Kings Mountain's drinking water?

The main public water system serving Kings Mountain in EPA records is Town of Kings Mountain. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Kings Mountain?

It depends on what you want to remove. In Kings Mountain, EPA testing found PFHxA and PFPeA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS; the system had 2 health-based violations since 2016, for TTHM; the utility's annual report says what was done about them. On the other hand, no lead service lines reported. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next