Water hardness in Belmont, NC

Water in Belmont is soft, with a median of 24 mg/L (1.4 grains per gallon) across 17 monitoring sites within 10 miles.

about the same as the North Carolina median (33 mg/L) 76th hardest of 92 North Carolina towns Population 15,515
24mg/L
1.4 grains per gallon
Soft

Belmont tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 24 mg/L means at home

  • Water softener: A water softener is generally not needed. Soft water rarely causes scale.
  • Dishwasher: set the water hardness to about 1.4 gpg (1.3 °dH), which is the lowest hardness setting (or softener off).
  • Kettles and coffee makers: descaling every 3–6 months is usually enough.
  • Laundry and soap: soap lathers easily and detergent goes further.
  • Water heater: routine flushing every 2–3 years is typically fine.

Where the number comes from

Monitoring sites17
Lab samples197
Sample years2000–2025
Middle 50% of sites20–32 mg/L
Surface water (rivers, lakes)24 mg/L · 17 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Belmont

Prefilled with Belmont's measured local hardness of 24 mg/L (1.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Belmont tap water

City of Belmont is the main public water system for Belmont. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 4 samples taken Dec 2023 – Sep 2024. 2 PFAS were detected.

ChemicalHighest resultDetected inEPA limit
PFPeA
perfluoropentanoic acid
3.6 ppt 4 of 4 samples —
PFHxA
perfluorohexanoic acid
3.5 ppt 4 of 4 samples —

Other water systems serving parts of Belmont

Water systemPFAS detectedHighest PFOA / PFOSTested
Two Rivers Utilities
serves over 10,000 people
None detected — Oct 2023 – Jul 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Belmont

City of Belmont reported 8,364 service lines (the pipes connecting homes to the water main) in its inventory. It reported no known lead lines, but 3,224 lines are still of unknown material.

0lead (0%)
0galvanized requiring replacement
3,224unknown material (39%)
5,140not lead (61%)

Other water systems serving parts of Belmont

Water systemService linesTotal
Two Rivers Utilities0 lead · 2 galvanized · 22,226 unknown34,568

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Belmont drinking water violations

EPA records show no health-based violations for City of Belmont since 2016. It also had 2 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.

Other water systems serving parts of Belmont

Water systemHealth-based violationsMonitoring/reporting
Two Rivers UtilitiesNone0

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Belmont

SiteTypeDistanceMedianSamplesYears
CATAWBA RIV AT POWERLINE CROSSING AT S BELMONT X REF C421000
NCDENR-DWQ (2nd)
Reservoir 1.8 mi26 mg/L112000–2001
S FORK CATAWBA RIV AT NC 7 AT MCADENVILLE
NCDENR-DWQ (2nd)
River/Stream 3.2 mi39 mg/L122000–2001
S FORK CATAWBA RIV AT NC 7 AT MCADENVILLE
North Carolina Dept of Environmental Quality NCDEQ-DWR WQX
River/Stream 3.2 mi26 mg/L172010–2025
S FORK CATAWBA RIV AT SR 2524 NR SOUTH BELMONT
NCDENR-DWQ (2nd)
Reservoir 3.8 mi24 mg/L112000–2001
S FORK CATAWBA RIV AT SR 2524 NR SOUTH BELMONT
North Carolina Dept of Environmental Quality NCDEQ-DWR WQX
Reservoir 3.8 mi20 mg/L212010–2022
CATAWBA CRK AT SR 2302 AT SC STATE LINE
NCDENR-DWQ (2nd)
Reservoir 4.9 mi26 mg/L112000–2001

Water hardness in towns near Belmont

TownDistanceMedianClass
Mount Holly7 mi 29 mg/LSoft
Gastonia8 mi 34 mg/LSoft
Charlotte12 mi 39 mg/LSoft
Pineville12 mi 66 mg/LModerately hard
Huntersville16 mi 28 mg/LSoft
Kings Mountain17 mi 35 mg/LSoft
Cornelius20 mi 23 mg/LSoft
Matthews20 mi 59 mg/LSoft
Lincolnton21 mi 32 mg/LSoft
Davidson22 mi 27 mg/LSoft

Gaston County

Belmont is in Gaston County, where the median is 27 mg/L (soft) across 14 sites.

See all of Gaston County →

North Carolina

The statewide median is 33 mg/L (soft) from 1,749 sites.

North Carolina hardness map →

Belmont, NC water: common questions

Do I need a water softener in Belmont?

Probably not. Water measured around Belmont is 1.4 gpg (24 mg/L, measured locally), under the 7 gpg (120 mg/L) level where scale on fixtures and appliances becomes noticeable.When a softener helps →

Who supplies Belmont's drinking water?

The main public water system serving Belmont in EPA records is City of Belmont. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →

Do I need a water filter in Belmont?

It depends on what you want to remove. In Belmont, EPA testing found PFPeA and PFHxA in the main system; filters certified to NSF/ANSI 53 or 58 for PFOA and PFOS reduction can lower PFAS. On the other hand, no lead service lines reported and no health-based violations since 2016. A water softener is not a filter.Filters that remove PFAS →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next