Water hardness in Town and Country, MO

Water in Town and Country is very hard, with a median of 274 mg/L (16 grains per gallon) across 32 monitoring sites within 10 miles.

31% harder than the Missouri median (209 mg/L) 23rd hardest of 87 Missouri towns Population 11,553
274mg/L
16 grains per gallon
Very hard

Town and Country tap water at a glance

Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?

What 274 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 16 gpg (15.4 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites32
Lab samples641
Sample years2000–2025
Middle 50% of sites239–333 mg/L
Groundwater (wells, springs)394 mg/L · 5 sites
Surface water (rivers, lakes)264 mg/L · 27 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Town and Country

Prefilled with Town and Country's measured local hardness of 274 mg/L (16 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

PFAS in Town and Country tap water

Town and Country is served by more than one water system. These systems supply ZIP codes in Town and Country and were tested for PFAS ("forever chemicals") in EPA's nationwide UCMR 5 study. Check your water bill to see which one is yours.

Water systems serving Town and Country

Water systemPFAS detectedHighest PFOA / PFOSTested
Mo American ST Louis ST Charles Counties
serves over 10,000 people
PFBA — Mar 2024 – Dec 2024
ST Louis City PWS
serves over 10,000 people
None detected — Mar 2024 – Dec 2024

What these PFAS levels mean → Which water filters remove PFAS →

Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology

Lead pipes in Town and Country

Town and Country is served by more than one water system. Their service line inventories, as reported to EPA:

Water systems serving Town and Country

Water systemService linesTotal
Mo American ST Louis ST Charles Counties9,422 lead · 1,247 galvanized · 191,341 unknown388,276
ST Louis City PWS9,990 lead · 525 galvanized · 64,378 unknown105,873

How to tell if your home has a lead pipe → Lead pipes in every state →

As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology

Town and Country drinking water violations

Town and Country is served by more than one water system. Health-based violations recorded by EPA since 2016:

Water systems serving Town and Country

Water systemHealth-based violationsMonitoring/reporting
Mo American ST Louis ST Charles CountiesNone0
ST Louis City PWSNone8

Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology

Monitoring sites closest to Town and Country

SiteTypeDistanceMedianSamplesYears
Trib to Grand Glaize Cr @ Manchester Rd
Missouri Dept. of Natural Resources
River/Stream 2.4 mi276 mg/L22025
Glaize Cr @ Manchester Rd.
Missouri Dept. of Natural Resources
River/Stream 2.4 mi320 mg/L212021–2025
Grand Glaize Cr 0.1 mi blw Dietrich Rd Bridge
Missouri Dept. of Natural Resources
River/Stream 2.5 mi312 mg/L232021–2025
Grand Glaize Cr. @ Love Park
Missouri Dept. of Natural Resources
River/Stream 2.7 mi266 mg/L242021–2025
Trib to Grand Glaize Cr. nr Love Park
Missouri Dept. of Natural Resources
River/Stream 2.7 mi327 mg/L232021–2025
Grand Glaize Creek downstream of Baxter Road
Missouri Dept. of Natural Resources
River/Stream 3.5 mi231 mg/L272021–2025

Water hardness in towns near Town and Country

TownDistanceMedianClass
Creve Coeur3 mi 266 mg/LVery hard
Manchester4 mi 266 mg/LVery hard
Ballwin5 mi 274 mg/LVery hard
Kirkwood5 mi 256 mg/LVery hard
Chesterfield6 mi 262 mg/LVery hard
Maryland Heights6 mi 292 mg/LVery hard
Webster Groves7 mi 250 mg/LVery hard
Crestwood7 mi 256 mg/LVery hard
Overland7 mi 294 mg/LVery hard
Clayton8 mi 256 mg/LVery hard

St. Louis County

Town and Country is in St. Louis County, where the median is 261 mg/L (very hard) across 61 sites.

See all of St. Louis County →

Missouri

The statewide median is 209 mg/L (very hard) from 1,834 sites.

Missouri hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next