Water hardness in Presque Isle County, MI
Water in Presque Isle County is hard, with a median of 140 mg/L (8.2 grains per gallon) across 12 monitoring sites.
Presque Isle County water at a glance
- HardnessHard (140 mg/L, 8.2 gpg, local measurements). Scale on fixtures, kettles and water heaters is likely.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 140 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 8.2 gpg (7.8 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Presque Isle County
Prefilled with Presque Isle County's measured local hardness of 140 mg/L (8.2 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Presque Isle County on the Michigan map
Cities and communities in Presque Isle County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Rogers City | 140 | Hard | county median |
| Onaway | 85 | Moderately hard | 3 sites within 10 miles |
| Presque Isle Harbor (CDP) | 155 | Hard | 4 sites within 10 miles |
| Posen | 140 | Hard | county median |
| Millersburg | 85 | Moderately hard | 7 sites within 10 miles |
Water quality in Presque Isle County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Rogers City | City of Rogers City | Not tested | 0 lead · 0 unknown | None |
| Onaway | City of Onaway | Not tested | 177 lead · 0 unknown | None |
| Presque Isle Harbor | Presque Isle Harbor Water Co. | Not tested | 0 lead · 29 unknown | None |
| Posen | Village of Posen | Not tested | 0 lead · 0 unknown | None |
| Millersburg | Village of Millersburg | Not tested | 0 lead · 0 unknown | None |
Neighboring counties
- Alpena County170 mg/L
- Montmorency County150 mg/L
- Alcona County120 mg/L
- Oscoda County130 mg/L
- Cheboygan County160 mg/L
- Otsego County81 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.