Water hardness in Alcona County, MI
Water in Alcona County is moderately hard, with a median of 120 mg/L (7 grains per gallon) across 9 monitoring sites.
Alcona County water at a glance
- HardnessModerately hard (120 mg/L, 7 gpg, local measurements). Some scale; descale kettles and flush the water heater.Water heater care →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 120 mg/L means at home
- Water softener: Many households here choose a softener to protect water heaters and appliances from scale.
- Dishwasher: set the water hardness to about 7 gpg (6.7 °dH), which is a medium-to-high hardness setting, with rinse aid.
- Kettles and coffee makers: descaling every 3–6 months is usually enough.
- Laundry and soap: soap lathers easily and detergent goes further.
- Water heater: routine flushing every 2–3 years is typically fine.
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Alcona County
Prefilled with Alcona County's measured local hardness of 120 mg/L (7 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Alcona County on the Michigan map
Cities and communities in Alcona County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Hubbard Lake (CDP) | 120 | Moderately hard | county median |
| Harrisville | 120 | Moderately hard | county median |
| Lost Lake Woods (CDP) | 120 | Moderately hard | county median |
| Lincoln | 120 | Moderately hard | county median |
Water quality in Alcona County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Harrisville | City of Harrisville | Not tested | 2 lead · 0 unknown | None |
Neighboring counties
- Alpena County170 mg/L
- Iosco County120 mg/L
- Oscoda County130 mg/L
- Presque Isle County140 mg/L
- Ogemaw County140 mg/L
- Montmorency County150 mg/L
Hardness scale
What to read next
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.