Water hardness in Pike County, IN

Water in Pike County is very hard, with a median of 304 mg/L (17.8 grains per gallon) across 19 monitoring sites.

about the same as the Indiana median (303 mg/L) 36th hardest of 90 counties
304mg/L
17.8 grains per gallon
Very hard

Pike County water at a glance

  • HardnessVery hard (304 mg/L, 17.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 304 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.8 gpg (17 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites19
Lab samples141
Sample years2000–2008
Middle 50% of sites199–950 mg/L
Surface water (rivers, lakes)304 mg/L · 19 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Pike County

Prefilled with Pike County's measured local hardness of 304 mg/L (17.8 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Pike County on the Indiana map

Fulton CountyDecatur CountyFountain CountyFayette CountyJay CountyBlackford CountyClay CountyMorgan CountyMarshall CountyNoble CountyBenton CountyJasper CountyWabash CountyTipton CountyCass CountyKosciusko CountyMontgomery CountyTippecanoe CountyMartin CountyFranklin CountyMadison CountyMiami CountyDubois CountyLaPorte CountyLake CountyAdams CountyOrange CountyPutnam CountyRipley CountyLawrence CountyGreene CountyParke CountyWarrick CountySpencer CountySullivan CountyShelby CountyBartholomew CountyClinton CountyOhio CountyPosey CountySwitzerland CountyKnox CountyJefferson CountyHancock CountyOwen CountyRush CountyDelaware CountyPorter CountyFloyd CountyWayne CountyVermillion CountyDaviess CountyDearborn CountyHarrison CountyScott CountyElkhart CountyVanderburgh CountySt. Joseph CountyNewton CountyHoward CountyMarion CountyJennings CountyHuntington CountyBoone CountyJohnson CountyJackson CountyCarroll CountyVigo CountyLaGrange CountyStarke CountyClark CountySteuben CountyWhitley CountyRandolph CountyPerry CountyWhite CountyGrant CountyBrown CountyCrawford CountyHenry CountyMonroe CountyWarren CountyPulaski CountyWashington CountyUnion CountyAllen CountyHamilton CountyGibson CountyHendricks CountyWells CountyDeKalb County

Cities and communities in Pike County

PlaceMedian mg/LClassBased on
Petersburg 192 Very hard 20 sites within 10 miles
Winslow 355 Very hard 24 sites within 10 miles
Otwell (CDP) 205 Very hard 12 sites within 10 miles
Spurgeon 320 Very hard 13 sites within 10 miles
Alford (CDP) 192 Very hard 20 sites within 10 miles
Arthur (CDP) 573 Very hard 18 sites within 10 miles
Glezen (CDP) 236 Very hard 18 sites within 10 miles
Stendal (CDP) 452 Very hard 16 sites within 10 miles
Velpen (CDP) 220 Very hard 19 sites within 10 miles

Water quality in Pike County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Petersburg Petersburg Water Company None detected 0 lead · 438 unknown None
Winslow Winslow Water Works Not tested 0 lead · 0 unknown None
Otwell Otwell Water Corporation Not tested 0 lead · 602 unknown 1
Spurgeon Spurgeon Water Works Not tested 0 lead · 131 unknown 1

Neighboring counties

Indiana

The statewide median is 303 mg/L (very hard) from 1,344 sites.

Indiana hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next