Water hardness in Montgomery County, IN

Water in Montgomery County is very hard, with a median of 332 mg/L (19.4 grains per gallon) across 12 monitoring sites.

10% harder than the Indiana median (303 mg/L) 22nd hardest of 90 counties
332mg/L
19.4 grains per gallon
Very hard

Montgomery County water at a glance

  • HardnessVery hard (332 mg/L, 19.4 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 332 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 19.4 gpg (18.6 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites12
Lab samples130
Sample years2000–2004
Middle 50% of sites288–344 mg/L
Surface water (rivers, lakes)332 mg/L · 12 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Montgomery County

Prefilled with Montgomery County's measured local hardness of 332 mg/L (19.4 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Montgomery County on the Indiana map

Fulton CountyDecatur CountyFountain CountyFayette CountyJay CountyBlackford CountyClay CountyMorgan CountyMarshall CountyNoble CountyBenton CountyJasper CountyWabash CountyTipton CountyCass CountyKosciusko CountyTippecanoe CountyMartin CountyFranklin CountyMadison CountyMiami CountyDubois CountyLaPorte CountyLake CountyAdams CountyOrange CountyPutnam CountyRipley CountyLawrence CountyGreene CountyParke CountyWarrick CountySpencer CountySullivan CountyShelby CountyBartholomew CountyClinton CountyOhio CountyPosey CountySwitzerland CountyKnox CountyJefferson CountyHancock CountyOwen CountyRush CountyDelaware CountyPorter CountyFloyd CountyWayne CountyVermillion CountyDaviess CountyDearborn CountyHarrison CountyScott CountyElkhart CountyVanderburgh CountySt. Joseph CountyNewton CountyHoward CountyMarion CountyJennings CountyHuntington CountyBoone CountyJohnson CountyJackson CountyCarroll CountyVigo CountyLaGrange CountyStarke CountyClark CountySteuben CountyWhitley CountyRandolph CountyPerry CountyWhite CountyGrant CountyBrown CountyCrawford CountyPike CountyHenry CountyMonroe CountyWarren CountyPulaski CountyWashington CountyUnion CountyAllen CountyHamilton CountyGibson CountyHendricks CountyWells CountyDeKalb County

Cities and communities in Montgomery County

PlaceMedian mg/LClassBased on
Crawfordsville 340 Very hard 9 sites within 10 miles
Ladoga 300 Very hard 5 sites within 10 miles
Waynetown 342 Very hard 5 sites within 10 miles
Lake Holiday (CDP) 340 Very hard 9 sites within 10 miles
Linden 350 Very hard 5 sites within 10 miles
Darlington 332 Very hard 8 sites within 10 miles
New Market 340 Very hard 9 sites within 10 miles
Waveland 324 Very hard 7 sites within 10 miles
New Richmond 350 Very hard 3 sites within 10 miles
New Ross 296 Very hard 4 sites within 10 miles
Wingate 332 Very hard county median
Alamo 324 Very hard 7 sites within 10 miles
Linnsburg (CDP) 331 Very hard 8 sites within 10 miles
Mace (CDP) 331 Very hard 8 sites within 10 miles

Water quality in Montgomery County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Crawfordsville Indiana American Water - Crawfordsville 1 found 11 lead · 3,175 unknown None
Ladoga Ladoga Water Works Not tested 2 lead · 1 unknown None
Waynetown Waynetown Water Works Not tested 0 lead · 404 unknown None
Linden Linden Water Department Not tested 0 lead · 0 unknown None
Darlington Darlington Water Not tested 0 lead · 0 unknown None
New Market New Market Water Works Not tested 0 lead · 273 unknown 2
Waveland Indiana American Water - Waveland Not tested 0 lead · 153 unknown None
New Richmond New Richmond Water Works Not tested 0 lead · 0 unknown None
Wingate Wingate Water Works Not tested 0 lead · 2 unknown None

Neighboring counties

Indiana

The statewide median is 303 mg/L (very hard) from 1,344 sites.

Indiana hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next