Water hardness in Fulton County, IN

Water in Fulton County is very hard, with a median of 408 mg/L (23.8 grains per gallon) across 4 monitoring sites.

35% harder than the Indiana median (303 mg/L) 2nd hardest of 90 counties
408mg/L
23.8 grains per gallon
Very hard

Fulton County water at a glance

  • HardnessVery hard (408 mg/L, 23.8 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 408 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 23.8 gpg (22.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites4
Lab samples56
Sample years2000–2004
Middle 50% of sites363–440 mg/L
Surface water (rivers, lakes)408 mg/L · 4 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Fulton County

Prefilled with Fulton County's measured local hardness of 408 mg/L (23.9 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Fulton County on the Indiana map

Decatur CountyFountain CountyFayette CountyJay CountyBlackford CountyClay CountyMorgan CountyMarshall CountyNoble CountyBenton CountyJasper CountyWabash CountyTipton CountyCass CountyKosciusko CountyMontgomery CountyTippecanoe CountyMartin CountyFranklin CountyMadison CountyMiami CountyDubois CountyLaPorte CountyLake CountyAdams CountyOrange CountyPutnam CountyRipley CountyLawrence CountyGreene CountyParke CountyWarrick CountySpencer CountySullivan CountyShelby CountyBartholomew CountyClinton CountyOhio CountyPosey CountySwitzerland CountyKnox CountyJefferson CountyHancock CountyOwen CountyRush CountyDelaware CountyPorter CountyFloyd CountyWayne CountyVermillion CountyDaviess CountyDearborn CountyHarrison CountyScott CountyElkhart CountyVanderburgh CountySt. Joseph CountyNewton CountyHoward CountyMarion CountyJennings CountyHuntington CountyBoone CountyJohnson CountyJackson CountyCarroll CountyVigo CountyLaGrange CountyStarke CountyClark CountySteuben CountyWhitley CountyRandolph CountyPerry CountyWhite CountyGrant CountyBrown CountyCrawford CountyPike CountyHenry CountyMonroe CountyWarren CountyPulaski CountyWashington CountyUnion CountyAllen CountyHamilton CountyGibson CountyHendricks CountyWells CountyDeKalb County

Cities and communities in Fulton County

PlaceMedian mg/LClassBased on
Rochester 408 Very hard county median
Akron 349 Very hard 3 sites within 10 miles
Kewanna 383 Very hard 7 sites within 10 miles
Fulton 432 Very hard 3 sites within 10 miles
Lake Bruce (CDP) 347 Very hard 6 sites within 10 miles
Leiters Ford (CDP) 383 Very hard 3 sites within 10 miles
Nyona Lake (CDP) 383 Very hard 3 sites within 10 miles
Talma (CDP) 312 Very hard 9 sites within 10 miles

Water quality in Fulton County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Rochester Rochester Water Department None detected 27 lead · 1,945 unknown None
Akron Akron Water Department Not tested 0 lead · 71 unknown None
Kewanna Kewanna Water Works Not tested 0 lead · 61 unknown None

Neighboring counties

Indiana

The statewide median is 303 mg/L (very hard) from 1,344 sites.

Indiana hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next