Radon in well water

Updated November 21, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: radon is a natural radioactive gas that dissolves in groundwater, so it shows up in private wells. There is no federal limit; states such as Wisconsin and Vermont advise action above 4,000 pCi/L. The main risk is breathing radon that escapes from the water in showers and taps. Test the water and your home's air; aeration is the most effective treatment.

Radon in water: advisory levels

SourceLevel in waterAdvice
Wisconsin DNROver 4,000 pCi/LConsider changing the water supply or treating it
Vermont Department of Health4,000 pCi/L advisory levelTest indoor air first, then decide on treatment
North Carolina4,000–10,000 pCi/LTreatment optional
North Carolina10,000 pCi/L or moreConsider treatment together with radon-in-air mitigation

pCi/L = picocuries per liter. North Carolina's rule of thumb: 10,000 pCi/L in water adds about 1 pCi/L to indoor air. EPA's recommended level for indoor air is 4 pCi/L.

Why the main risk is breathing it

Radon gas escapes from water as soon as it meets air, at faucets, showers, dishwashers and washing machines, and raises the radon level in the home. North Carolina's radon program says about 89% of the cancer deaths EPA estimates from radon in water are caused by breathing radon released from water, which leads to lung cancer. Vermont adds that drinking radon over a lifetime poses a stomach cancer risk, but that the major danger is breathing it. Soil gas under the house is the most common source of indoor radon, so test the air too.

How to test

  • You cannot see, smell or taste radon: testing is the only way to know. Use a certified lab (your state can recommend one).
  • Vermont notes radon in well water can vary through the year, so testing more than once can help.
  • Test indoor air as well; air test kits should say they meet EPA requirements, according to Wisconsin DNR.
  • Testing a well for radon? Also test for uranium and the usual yearly well tests.

Treatment: aeration vs carbon

TreatmentWhat the states say
Aeration (whole house)Mixes water with air in a tank and vents the radon outside. Wisconsin: the most effective treatment, typically about $3,500, and must be designed to avoid fouling by iron or hardness.
Granular activated carbon (whole house)Effective, but filters can build up hazardous radiation above 4,000 pCi/L (Wisconsin); Vermont discourages it.
Faucet or under-sink carbon filtersNot adequate for radon (Wisconsin)

Because radon is a breathing risk, it needs a whole-house system: see whole-house vs under-sink filters. Hard or iron-rich water may need pretreatment first: check your area's water hardness.

Frequently asked questions

Is there a limit for radon in drinking water?

There is no federal drinking water standard for radon. States use advisory levels instead: Wisconsin and Vermont use 4,000 pCi/L, and North Carolina considers treatment optional between 4,000 and 10,000 pCi/L and recommends it at 10,000 pCi/L or more together with radon-in-air mitigation.

Is radon in well water dangerous to drink?

The main risk is breathing it. Radon escapes from water at taps, showers and washing machines; North Carolina says about 89% of the cancer deaths EPA estimates from radon in water come from breathing radon released from water. Drinking it over a lifetime also adds a stomach cancer risk, according to the Vermont Department of Health.

How much does radon in water add to indoor air?

As a general rule, 10,000 pCi/L of radon in water adds about 1 pCi/L to the air in the home, according to North Carolina's radon program. EPA's recommended level for air is 4 pCi/L.

How do you remove radon from well water?

Aeration systems, which mix the water with air in a tank and vent the radon outdoors, are considered the most effective. Granular activated carbon also works but can build up radiation on the filter; Vermont discourages it. Small faucet or under-sink carbon filters are not adequate for radon.

Sources

Related guides