Well water testing in Canada
Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content
Short answer: Health Canada says to test a private well for bacteria at least every 6 months and for general water quality every 2 years. The chemicals it lists as most common to test for are arsenic, copper, lead, manganese, nitrate and nitrite, and uranium. Use an accredited lab or your local public health unit.
How often to test: Health Canada and the provinces
| Source | Bacteria | Chemicals |
|---|---|---|
| Health Canada | At least every 6 months | General water quality every 2 years; specific chemicals as advised by local public health |
| British Columbia (HealthLinkBC) | At least once a year, and right away if clarity, colour or taste changes | When the well is built, then every year |
| Nova Scotia | At least every year | Every 5 years (a 31-parameter package) |
| Ontario (Public Health Ontario) | Free bacteria testing for private wells | Through accredited private labs |
Where advice differs, follow your province or local health unit: they know the risks in your area.
What to test for
- Bacteria: E. coli and total coliforms. Health Canada's acceptable result is none of either in a 100 mL sample. See coliform bacteria and E. coli.
- Common chemicals (Health Canada): arsenic, copper, lead, manganese, nitrate and nitrite, uranium. Nova Scotia says arsenic, manganese and uranium are prevalent in the province; BC also lists fluoride.
- General water quality every 2 years: pH, iron, chloride, alkalinity, ammonia, hardness, sodium, sulphate, total dissolved solids and dissolved organic carbon.
Compare your results with Health Canada's guidelines, for example 0.010 mg/L for arsenic and 45 mg/L for nitrate.
When to test again
Health Canada says the best time to sample is when contamination is most likely. Test again:
- after heavy rain, flooding or a wildfire;
- if the water's colour, taste or smell changes (see rotten-egg smell and iron and manganese stains);
- after repairs or maintenance on the well or its equipment.
Where to get your well tested
Your provincial or territorial drinking water authority or local public health unit can point you to an accredited laboratory. Health Canada says only tests from an accredited lab or your public health unit are accurate and reliable. In the US? See EPA's well testing advice. Check how hard groundwater is near you on the Canada water hardness map.
Got a uranium result? See uranium in well water.
Frequently asked questions
How often should I test my well water in Canada?
Health Canada says to test for bacteria (E. coli and total coliforms) at least once every 6 months, and general water quality (including hardness, iron and pH) once every 2 years. How often to test for specific chemicals depends on your area; ask your local public health authority.
What chemicals should I test my well for?
Health Canada lists arsenic, copper, lead, manganese, nitrate and nitrite, and uranium as the most common chemicals to test for in Canadian well water. Provinces add others; British Columbia also names fluoride.
Is well water testing free in Ontario?
Public Health Ontario tests private well water for bacteria (E. coli and total coliforms) at no charge. Chemical tests are done by accredited private laboratories.
What does a good bacteria result look like?
Health Canada's acceptable result is no E. coli and no total coliforms in a 100 mL sample. HealthLinkBC says E. coli in drinking water is an immediate health concern.