How to test your water hardness

Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: the quickest free check is to look up your town on our water hardness map or ask your water utility. At home, hardness test strips give a range in minutes. For a private well, a certified lab test gives an exact number. Then compare the result with the USGS classes below.

Four ways to test your water hardness

MethodBest forWhat you get
Look up your town (Canada)Everyone, freeMeasured hardness for your town or county
Ask your water utilityCity waterThe utility's own figure; check whether it is in mg/L or gpg
Test stripsA quick check at the tapA range, read from a color chart
Certified labPrivate wells, sizing a softenerAn exact number, often with iron and other minerals

Using test strips

  1. Run the cold tap briefly and fill a clean glass. If you have a softener, test an unsoftened tap too, to see whether it is working.
  2. Dip the strip for the time on the package and compare its color with the chart.
  3. Note the unit on the chart (gpg or ppm) and convert if needed with the hardness converter.

Because strips give a range, use a lab test or your town's measured value when you size a water softener.

Reading the result

USGS classmg/L (ppm)Grains per gallon
Soft0–600–3.5
Moderately hard61–1203.6–7.0
Hard121–1807.1–10.5
Very hardover 180over 10.5

Well owners: EPA recommends testing a private well regularly; a lab can test hardness along with the yearly checks. See how to test your well water, and iron and manganese if you see stains.

Frequently asked questions

How can I find out how hard my water is for free?

Look up your town on our water hardness map, which uses measurements from USGS, EPA and state agencies, or ask your water utility for its hardness figure.

How do water hardness test strips work?

You dip a strip in a water sample and compare the color change with the chart on the package. Strips show a range rather than an exact number.

What units do hardness tests use?

Usually grains per gallon (gpg), parts per million (ppm) or milligrams per liter (mg/L) as calcium carbonate. 1 gpg = 17.1 mg/L; ppm and mg/L are the same for water.

What hardness counts as hard water?

USGS classes: 0–60 mg/L soft, 61–120 moderately hard, 121–180 hard, and over 180 mg/L very hard.

Sources

Related guides