Water hardness in Delaware

Tap and well water across Delaware is soft on average: a median of 53 mg/L, or 3.1 grains per gallon. That makes it the 40th hardest of 51 states.

823monitoring sites
25,300lab samples
2000–2026sample years
53mg/L
3.1 grains per gallon
Soft

Delaware water hardness map by county

Each county is shaded by the median of its monitoring sites. Click a county for local detail.

Sussex County: 35 mg/L (Soft)Kent County: 55 mg/L (Soft)New Castle County: 90 mg/L (Moderately hard)
SoftModerately hardHardVery hardNo data

How hard is water in Delaware?

Of the 823 monitoring sites in Delaware, 58% measure soft, 29% moderately hard, 9% hard and 4% very hard. Half of all sites fall between 32 and 82 mg/L.

Groundwater (wells and springs) has a median of 50 mg/L, while rivers, lakes and reservoirs average 54 mg/L.

Largest cities

Wilmington 100 mg/L
Dover 62 mg/L
Newark 86 mg/L
Middletown 68 mg/L
Bear 85 mg/L
Brookside 90 mg/L
Glasgow 76 mg/L
Hockessin 99 mg/L
Milford 47 mg/L
Smyrna 67 mg/L

PFAS in Delaware drinking water

In EPA's UCMR 5 study, 36 public water systems in Delaware tested their drinking water for 29 PFAS ("forever chemicals"). 17 (47%) found at least one, and 14 had a PFOA or PFOS sample above EPA's 4 ppt limit. Of the 6 Delaware towns on this site matched to a main water system, 3 had no PFAS detected and 3 had a PFOA or PFOS result above 4 ppt.

Highest PFOA and PFOS results in Delaware

TownWater systemPFOAPFOS
NewarkNewark Water Department 25.3 ppt7.5 ppt
WilmingtonWilmington Water Department 9.9 pptND
SmyrnaSmyrna Water Department 9.8 ppt6.7 ppt

Highest single sample; one result above a limit is not a violation (limits apply to yearly averages from 2029). "ND" = not detected. PFAS in every state · What PFAS levels mean · Source: EPA UCMR 5

Lead pipes in Delaware

Community water systems in Delaware reported 2,691 lead service lines, 3,601 galvanized lines requiring replacement and 113,405 lines of unknown material (34% of all lines) to EPA, as of the first quarter of 2026. Of the 6 Delaware towns on this site with a reported inventory, 0 have no lead, galvanized or unknown lines.

Towns with the most lead service lines in Delaware

TownLeadGalvanized (replace)UnknownShare lead
Wilmington1,70866911,2416%
Milford31142,740<1%
Smyrna272,211<1%
Dover01,2736,5640%
Middletown03500%
Newark016,5120%

Lead pipes in every state · How to check your own pipe · Source: EPA service line inventory

Drinking water violations in Delaware

Since 2016, 2 of the 12 Delaware water systems serving towns on this site had at least one health-based violation (a contaminant or disinfectant above its legal limit, or a required treatment step not met), 2 in total; 0 are still open. 4 of 6 towns with a main water system had none.

Towns with the most health-based violations in Delaware

TownWater systemViolationsOpenMost commonMost recent
WilmingtonWilmington Water Department1— Surface water treatment (Long Term 2 rule)Oct 2017
MilfordMilford Water Department1— FluorideJun 2020

Monitoring and reporting violations (missed or late tests) are listed on each town's page. Source: EPA ECHO / SDWIS (2026Q3) · Methodology

Hardest water in Delaware

  1. Wilmington100 mg/L
  2. Hockessin99 mg/L
  3. Pike Creek Valley94 mg/L
  4. Brookside90 mg/L
  5. Newark86 mg/L
  6. Bear85 mg/L
  7. Glasgow76 mg/L
  8. Middletown68 mg/L
  9. Smyrna67 mg/L
  10. Dover62 mg/L

Softest water in Delaware

  1. Milford47 mg/L
  2. Dover62 mg/L
  3. Smyrna67 mg/L
  4. Middletown68 mg/L
  5. Glasgow76 mg/L
  6. Bear85 mg/L
  7. Newark86 mg/L
  8. Brookside90 mg/L
  9. Pike Creek Valley94 mg/L
  10. Hockessin99 mg/L

All 3 counties in Delaware

CountyMedian mg/LgpgClassSites
Kent County 55 3.2 Soft 188
New Castle County 90 5.2 Moderately hard 255
Sussex County 35 2 Soft 380

Cities and towns in Delaware A–Z

B

D

G

H

M

N

S

W

Smaller communities are listed on their county page.