Iron and manganese in well water

Updated November 20, 2026 · Based on EPA and other public sources listed below · How we make our content

Short answer: orange or red-brown stains usually mean iron (EPA guideline 0.3 mg/L); black or brown stains usually mean manganese (guideline 0.05 mg/L). Iron is a nuisance, not a health hazard. Manganese has an EPA health advisory of 300 µg/L: above that, don't use the water for rice- or soy-based infant formula. Test first, then choose treatment.

What you see, and what it usually means

SignUsual causeEPA guideline (not enforceable)
Rusty color, orange or reddish stains, metallic taste, sedimentIron0.3 mg/L (300 µg/L)
Black to brown color, black stains, bitter metallic tasteManganese0.05 mg/L (50 µg/L)
Red-brown or black slime in the toilet tank, foul or rotten-egg smellIron or manganese bacteria—
Black sludge in coffee or teaIron or manganese reacting with tannins—

Water from a deep well can come out clear and only turn color after standing, because dissolved iron and manganese change to colored particles when they meet air. Chlorine bleach can make the stains worse.

Health: iron vs manganese

  • Iron is not considered a health hazard; the guideline is about taste, color and stains.
  • Manganese has an EPA lifetime health advisory of 300 µg/L. University of Nebraska–Lincoln Extension advises against using water above 300 µg/L to mix rice- or soy-based infant formula (those formulas are naturally rich in manganese), and against drinking water above 1,000 µg/L. Ask your doctor about health concerns.

Testing

Testing a private well isn't required by federal or state law, so it's up to the owner. Ask a lab that uses EPA methods to test for iron and manganese, and for iron/manganese bacteria if you see slime. Add these to your regular well tests: see how to test your well water. City water customers can ask their utility, which may treat for iron and manganese voluntarily.

Treatment options

  • For drinking water only: point-of-use reverse osmosis, distillation or carbon filters made to remove manganese (and often iron). Check that the product is designed for manganese; filters wear out faster above about 200 µg/L. See reverse osmosis.
  • For the whole house (stains affect every tap): point-of-entry treatment. Utilities commonly use aeration or chemical oxidation followed by filtration, or phosphate treatment.
  • Your water softener can be fouled by iron and manganese buildup; deal with them first or ask the manufacturer. See water softeners.
  • Choose equipment certified by NSF or the Water Quality Association for the contaminants you want removed (note that they don't certify units for manganese).

Frequently asked questions

Why is my water leaving orange or red stains?

Usually iron. When dissolved iron meets air it turns into red-brown particles that stain laundry, sinks, toilets and dishes. EPA's guideline (secondary standard) for iron is 0.3 mg/L; above that, stains and a metallic taste are common.

What causes black or brown stains?

Usually manganese. EPA's guideline for manganese is 0.05 mg/L; above it, water can turn black to brown and leave black stains.

Is iron in well water harmful?

Iron isn't considered a health hazard, according to University of Nebraska–Lincoln Extension. It's a nuisance: stains, taste and buildup in pipes and appliances.

Is manganese in water dangerous?

EPA has a lifetime health advisory of 300 µg/L (0.3 mg/L) for manganese. University of Nebraska–Lincoln Extension advises not using water above that level to mix rice- or soy-based infant formula, and not drinking water above 1,000 µg/L.

Why does my well water smell like rotten eggs?

One common cause is iron or manganese bacteria, which also leave red-brown or black slime in toilet tanks. They aren't a known health risk but can clog systems. Ask the lab to test for them if you see slime.

Sources

Related guides