Water hardness in District of Columbia
Tap and well water across District of Columbia is hard on average: a median of 142 mg/L, or 8.3 grains per gallon. That makes it the 22nd hardest of 51 states.
District of Columbia water hardness map by county
Each county is shaded by the median of its monitoring sites. Click a county for local detail.
How hard is water in District of Columbia?
Of the 48 monitoring sites in District of Columbia, 27% measure soft, 17% moderately hard, 29% hard and 27% very hard. Half of all sites fall between 55 and 182 mg/L.
Groundwater (wells and springs) has a median of 121 mg/L, while rivers, lakes and reservoirs average 184 mg/L.
Largest cities
| Washington | 142 mg/L |
PFAS in District of Columbia drinking water
In EPA's UCMR 5 study, 3 public water systems in District of Columbia tested their drinking water for 29 PFAS ("forever chemicals"). 3 (100%) found at least one, and 0 had a PFOA or PFOS sample above EPA's 4 ppt limit. Of the 1 District of Columbia towns on this site matched to a main water system, 0 had no PFAS detected and 0 had a PFOA or PFOS result above 4 ppt.
Highest single sample; one result above a limit is not a violation (limits apply to yearly averages from 2029). "ND" = not detected. PFAS in every state · What PFAS levels mean · Source: EPA UCMR 5
Lead pipes in District of Columbia
Community water systems in District of Columbia reported 16,935 lead service lines, 220 galvanized lines requiring replacement and 13,427 lines of unknown material (10% of all lines) to EPA, as of the first quarter of 2026. Of the 1 District of Columbia towns on this site with a reported inventory, 0 have no lead, galvanized or unknown lines.
Towns with the most lead service lines in District of Columbia
| Town | Lead | Galvanized (replace) | Unknown | Share lead |
|---|---|---|---|---|
| Washington | 16,935 | 190 | 13,388 | 12% |
Lead pipes in every state · How to check your own pipe · Source: EPA service line inventory
Drinking water violations in District of Columbia
Since 2016, 2 of the 3 District of Columbia water systems serving towns on this site had at least one health-based violation (a contaminant or disinfectant above its legal limit, or a required treatment step not met), 9 in total; 0 are still open. 1 of 1 towns with a main water system had none.
Monitoring and reporting violations (missed or late tests) are listed on each town's page. Source: EPA ECHO / SDWIS (2026Q3) · Methodology
All 1 counties in District of Columbia
| County | Median mg/L | gpg | Class | Sites |
|---|---|---|---|---|
| District of Columbia | 142 | 8.3 | Hard | 48 |
Cities and towns in District of Columbia A–Z
W
- Washington · 142
Smaller communities are listed on their county page.