Water hardness in Sussex, WI
Water in Sussex is very hard, with a median of 335 mg/L (19.6 grains per gallon) across 19 monitoring sites within 10 miles.
Sussex tap water at a glance
- HardnessVery hard (335 mg/L, 19.6 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- PFASNone found in EPA's nationwide testing of the main water system.PFAS results →
- Lead pipesNo lead service lines reported.Details →
- Violations44 health-based violations since 2016.What they were →
Choosing a filter? Whole-house vs under-sink · Reverse osmosis · Hot or cold tap water?
What 335 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 19.6 gpg (18.8 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Sussex
Prefilled with Sussex's measured local hardness of 335 mg/L (19.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
PFAS in Sussex tap water
Sussex Village Hall & Water Utility is the main public water system for Sussex. EPA's nationwide UCMR 5 study tested it for 29 PFAS ("forever chemicals") in 8 samples taken Aug 2023 – Jan 2024. No PFAS were found at or above EPA's minimum reporting levels.
Other water systems serving parts of Sussex
| Water system | PFAS detected | Highest PFOA / PFOS | Tested |
|---|---|---|---|
| Brookfield Water Utility serves over 10,000 people | PFBS, PFPeA, PFHxA +1 more | — | Jan 2023 – Jul 2025 |
What these PFAS levels mean → Which water filters remove PFAS →
Highest single sample in parts per trillion (ppt). Limits apply to yearly averages from 2029, so one high sample is not a violation. *Limit proposed for withdrawal in 2026. ND = not detected. PFAS results for every state · Source: EPA UCMR 5 · Methodology
Lead pipes in Sussex
Sussex Village Hall & Water Utility reported 3,934 service lines (the pipes connecting homes to the water main) in its inventory. It reported no lead or galvanized lines requiring replacement.
Other water systems serving parts of Sussex
| Water system | Service lines | Total |
|---|---|---|
| Brookfield Water Utility | 0 lead · 0 galvanized · 485 unknown | 13,817 |
How to tell if your home has a lead pipe → Lead pipes in every state →
As reported to EPA (first quarter of 2026). Unknown lines may or may not contain lead; numbers change as utilities inspect lines. Sources: EPA service line inventory · EPA Lead and Copper Rule Improvements · Methodology
Sussex drinking water violations
EPA records show 44 health-based violations for Sussex Village Hall & Water Utility since 2016, all since resolved or closed. The most recent began in Jul 2019. It also had 13 monitoring or reporting violations (a required test or report was missed or late), which on their own do not mean the water exceeded a limit.
| Contaminant or rule | Type | Violations | Most recent | Status |
|---|---|---|---|---|
| Radium naturally occurring radioactive element in some groundwater highest measured 8.13 PCI/L; limit 5 pCi/L | Contaminant above legal limit | 39 | Jul 2019 | Resolved/closed |
| Gross alpha radiation natural radioactivity in some groundwater highest measured 20.03 PCI/L; limit 15 pCi/L | Contaminant above legal limit | 5 | Jul 2019 | Resolved/closed |
Other water systems serving parts of Sussex
| Water system | Health-based violations | Monitoring/reporting |
|---|---|---|
| Brookfield Water Utility | 7 | 49 |
Violations since January 2016, EPA records (2026Q3). A violation is not the same as illness; your utility's annual water quality report explains each one. Violations in every state · Source: EPA ECHO / SDWIS · Methodology
Monitoring sites closest to Sussex
| Site | Type | Distance | Median | Samples | Years |
|---|---|---|---|---|---|
| 8N18e-27.1c USGS Illinois Water Science Center | Well | 0.7 mi | 485 mg/L | 8 | 2000–2021 |
| 8N19E-23.3f USGS Illinois Water Science Center | Well | 1.2 mi | 495 mg/L | 3 | 2000–2021 |
| 8N19E-15.6E USGS Illinois Water Science Center | Well | 1.7 mi | 378 mg/L | 1 | 2001 |
| 7N20E-18.1c USGS Illinois Water Science Center | Well | 5.7 mi | 540 mg/L | 3 | 2000–2021 |
| WILLOW CREEK AT MAPLE ROAD NEAR GERMANTOWN, WI USGS Wisconsin Water Science Center | Stream | 6.5 mi | 374 mg/L | 12 | 2004–2005 |
| 7N20E-16.3E USGS Illinois Water Science Center | Well | 6.6 mi | 419 mg/L | 1 | 2001 |
Water hardness in towns near Sussex
| Town | Distance | Median | Class |
|---|---|---|---|
| Pewaukee | 5 mi | 378 mg/L | Very hard |
| Menomonee Falls | 6 mi | 335 mg/L | Very hard |
| Hartland | 6 mi | 279 mg/L | Very hard |
| Richfield | 7 mi | 266 mg/L | Very hard |
| Brookfield | 7 mi | 335 mg/L | Very hard |
| Germantown | 9 mi | 346 mg/L | Very hard |
| Waukesha | 9 mi | 360 mg/L | Very hard |
| Wauwatosa | 11 mi | 253 mg/L | Very hard |
| Mequon | 12 mi | 298 mg/L | Very hard |
| New Berlin | 12 mi | 305 mg/L | Very hard |
Waukesha County
Sussex is in Waukesha County, where the median is 268 mg/L (very hard) across 50 sites.
See all of Waukesha County →Sussex, WI water: common questions
Do I need a water softener in Sussex?
Very likely. Water measured around Sussex is 19.6 gpg (335 mg/L, measured locally), above 10.5 gpg (180 mg/L), where softeners are common. For a 3-person home that regenerates weekly, that means a softener of about 34,000 grains.Size it for your household →
Who supplies Sussex's drinking water?
The main public water system serving Sussex in EPA records is Sussex Village Hall & Water Utility. Some neighborhoods may be served by a different system, so check the name on your water bill.How we match towns to water systems →
Do I need a water filter in Sussex?
It depends on what you want to remove. In Sussex, the system had 44 health-based violations since 2016, for Combined Radium (-226 and -228) and Gross Alpha, Excl. Radon and U; the utility's annual report says what was done about them. On the other hand, no PFAS found in EPA testing and no lead service lines reported. A water softener is not a filter.How to read your water quality report →
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.