Water hardness in Mercer County, OH

Water in Mercer County is very hard, with a median of 330 mg/L (19.3 grains per gallon) across 43 monitoring sites.

20% harder than the Ohio median (276 mg/L) 19th hardest of 88 counties
330mg/L
19.3 grains per gallon
Very hard

Mercer County water at a glance

  • HardnessVery hard (330 mg/L, 19.3 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 330 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 19.3 gpg (18.5 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites43
Lab samples236
Sample years2000–2024
Middle 50% of sites268–410 mg/L
Groundwater (wells, springs)861 mg/L · 2 sites
Surface water (rivers, lakes)330 mg/L · 41 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Mercer County

Prefilled with Mercer County's measured local hardness of 330 mg/L (19.3 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Mercer County on the Ohio map

Jackson CountyPickaway CountyHardin CountyWyandot CountyPaulding CountyRoss CountyRichland CountyTuscarawas CountyHenry CountyDarke CountyMorgan CountyShelby CountyVan Wert CountyCrawford CountyGuernsey CountyGeauga CountyPerry CountyMorrow CountyPutnam CountyHarrison CountySeneca CountyVinton CountyFayette CountyLicking CountyFulton CountyLake CountyStark CountyCuyahoga CountyFranklin CountyMiami CountyErie CountyHolmes CountyHighland CountyClark CountyFairfield CountyWarren CountyClinton CountyPreble CountyAthens CountyAuglaize CountyBrown CountyTrumbull CountyLorain CountyWayne CountyWood CountyMonroe CountyWilliams CountyLucas CountyGallia CountyClermont CountyHocking CountyHuron CountyCoshocton CountyBelmont CountyAshland CountyJefferson CountyAdams CountyMadison CountyMontgomery CountyMuskingum CountyPike CountyHamilton CountySandusky CountyScioto CountyButler CountyCarroll CountyMarion CountyMedina CountyLogan CountyPortage CountyMahoning CountyUnion CountyColumbiana CountyWashington CountyMeigs CountyAshtabula CountyLawrence CountyGreene CountyOttawa CountyHancock CountyChampaign CountyDelaware CountyNoble CountySummit CountyDefiance CountyKnox CountyAllen County

Cities and communities in Mercer County

PlaceMedian mg/LClassBased on
Celina 274 Very hard 30 sites within 10 miles
Coldwater 351 Very hard 19 sites within 10 miles
St. Henry 385 Very hard 18 sites within 10 miles
Fort Recovery 583 Very hard 10 sites within 10 miles
Rockford 285 Very hard 32 sites within 10 miles
Mendon 278 Very hard 43 sites within 10 miles
Chickasaw 332 Very hard 35 sites within 10 miles
Burkettsville 369 Very hard 31 sites within 10 miles
Montezuma 305 Very hard 27 sites within 10 miles
Maria Stein (CDP) 345 Very hard 34 sites within 10 miles

Water quality in Mercer County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Celina Celina City 1 found 0 lead · 0 unknown None
Coldwater Coldwater Village None detected 0 lead · 0 unknown None
St. Henry ST Henry Village Not tested 0 lead · 0 unknown None
Fort Recovery FT Recovery Village Not tested 0 lead · 0 unknown None
Rockford Rockford Village Not tested 0 lead · 4 unknown 1
Mendon Mendon Village Not tested 0 lead · 0 unknown None
Chickasaw Chickasaw Village Not tested 0 lead · 30 unknown None

Neighboring counties

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next