Water hardness in Guernsey County, OH
Water in Guernsey County is very hard, with a median of 249 mg/L (14.5 grains per gallon) across 63 monitoring sites.
Guernsey County water at a glance
- HardnessVery hard (249 mg/L, 14.5 gpg, local measurements). Water softeners are common at this level.Size a water softener →
- Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →
What 249 mg/L means at home
- Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
- Dishwasher: set the water hardness to about 14.5 gpg (13.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
- Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
- Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
- Water heater: flush the tank once a year to clear sediment and scale.
Size a softener for your home → Hard water and your water heater →
Where the number comes from
Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it
Water softener and dishwasher calculator for Guernsey County
Prefilled with Guernsey County's measured local hardness of 249 mg/L (14.6 gpg). If your water bill or utility report gives a different number, enter it instead.
Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter
Guernsey County on the Ohio map
Cities and communities in Guernsey County
| Place | Median mg/L | Class | Based on |
|---|---|---|---|
| Cambridge | 206 | Very hard | 42 sites within 10 miles |
| Byesville | 244 | Very hard | 40 sites within 10 miles |
| Senecaville | 235 | Very hard | 45 sites within 10 miles |
| Buffalo (CDP) | 274 | Very hard | 47 sites within 10 miles |
| Pleasant City | 274 | Very hard | 51 sites within 10 miles |
| Quaker City | 229 | Very hard | 29 sites within 10 miles |
| Cumberland | 434 | Very hard | 37 sites within 10 miles |
| Lore City | 235 | Very hard | 37 sites within 10 miles |
| Old Washington | 184 | Very hard | 34 sites within 10 miles |
| Kimbolton (CDP) | 175 | Hard | 53 sites within 10 miles |
| Salesville (CDP) | 230 | Very hard | 28 sites within 10 miles |
| Fairview | 607 | Very hard | 36 sites within 10 miles |
Water quality in Guernsey County communities
Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology
| Community | Water system | PFAS | Lead lines | Violations |
|---|---|---|---|---|
| Cambridge | City of Cambridge | 2 found (PFOA 5.6 / PFOS ND ppt) | 500 lead · 3,359 unknown | 3 |
| Byesville | Byesville | None detected | 0 lead · 1,816 unknown | 16 |
| Pleasant City | Village of Pleasant City | Not tested | 0 lead · 0 unknown | None |
| Quaker City | Quaker City | Not tested | 0 lead · 279 unknown | None |
Neighboring counties
- Noble County285 mg/L
- Muskingum County216 mg/L
- Harrison County307 mg/L
- Tuscarawas County340 mg/L
- Belmont County339 mg/L
- Coshocton County198 mg/L
Hardness scale
What to read next
- Do you need a water softener?Water here is very hard; size a softener with our calculator.
- Hard water and your water heaterHow scale affects your water heater and how often to flush.
- Water hardness converterConvert mg/L to grains per gallon or °dH for your dishwasher.
- How to test your well waterFor homes on private wells, which local data doesn't cover.