Water hardness in Clermont County, OH

Water in Clermont County is very hard, with a median of 208 mg/L (12.1 grains per gallon) across 98 monitoring sites.

25% softer than the Ohio median (276 mg/L) 68th hardest of 88 counties
208mg/L
12.1 grains per gallon
Very hard

Clermont County water at a glance

  • HardnessVery hard (208 mg/L, 12.1 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 208 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 12.1 gpg (11.7 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites98
Lab samples559
Sample years2000–2024
Middle 50% of sites166–237 mg/L
Groundwater (wells, springs)282 mg/L · 3 sites
Surface water (rivers, lakes)206 mg/L · 95 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Clermont County

Prefilled with Clermont County's measured local hardness of 208 mg/L (12.2 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Clermont County on the Ohio map

Jackson CountyPickaway CountyHardin CountyWyandot CountyPaulding CountyRoss CountyRichland CountyTuscarawas CountyHenry CountyDarke CountyMorgan CountyShelby CountyVan Wert CountyCrawford CountyGuernsey CountyGeauga CountyPerry CountyMorrow CountyPutnam CountyHarrison CountySeneca CountyVinton CountyFayette CountyLicking CountyFulton CountyLake CountyStark CountyCuyahoga CountyFranklin CountyMiami CountyErie CountyHolmes CountyHighland CountyClark CountyFairfield CountyWarren CountyClinton CountyPreble CountyAthens CountyAuglaize CountyBrown CountyTrumbull CountyLorain CountyWayne CountyWood CountyMonroe CountyWilliams CountyLucas CountyGallia CountyHocking CountyHuron CountyCoshocton CountyBelmont CountyAshland CountyJefferson CountyAdams CountyMadison CountyMercer CountyMontgomery CountyMuskingum CountyPike CountyHamilton CountySandusky CountyScioto CountyButler CountyCarroll CountyMarion CountyMedina CountyLogan CountyPortage CountyMahoning CountyUnion CountyColumbiana CountyWashington CountyMeigs CountyAshtabula CountyLawrence CountyGreene CountyOttawa CountyHancock CountyChampaign CountyDelaware CountyNoble CountySummit CountyDefiance CountyKnox CountyAllen County

Cities and communities in Clermont County

PlaceMedian mg/LClassBased on
Withamsville (CDP) 231 Very hard 57 sites within 10 miles
Milford 232 Very hard 68 sites within 10 miles
Summerside (CDP) 233 Very hard 60 sites within 10 miles
Amelia (CDP) 207 Very hard 57 sites within 10 miles
Mount Carmel (CDP) 226 Very hard 58 sites within 10 miles
Mount Repose (CDP) 222 Very hard 70 sites within 10 miles
Mulberry (CDP) 234 Very hard 67 sites within 10 miles
New Richmond 223 Very hard 27 sites within 10 miles
Bethel 200 Very hard 47 sites within 10 miles
Williamsburg 175 Hard 60 sites within 10 miles
Day Heights (CDP) 223 Very hard 67 sites within 10 miles
Batavia 201 Very hard 70 sites within 10 miles
Owensville 195 Very hard 74 sites within 10 miles
Felicity 217 Very hard 23 sites within 10 miles
Miamiville (CDP) 244 Very hard 77 sites within 10 miles
Moscow 226 Very hard 15 sites within 10 miles
Neville 223 Very hard 17 sites within 10 miles
Chilo 218 Very hard 18 sites within 10 miles
Goshen (CDP) 215 Very hard 76 sites within 10 miles
Marathon (CDP) 171 Hard 52 sites within 10 miles

Water quality in Clermont County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Milford Milford City PWS 7 found (PFOA 4.1 / PFOS 7.8 ppt) 0 lead · 0 unknown None
New Richmond New Richmond Village PWS Not tested 0 lead · 821 unknown None
Bethel Bethel Village PWS 1 found (PFOA 7.9 / PFOS ND ppt) 0 lead · 1,794 unknown 1
Williamsburg Williamsburg Village PWS Not tested 0 lead · 0 unknown 1
Felicity Felicity Village PWS None detected 0 lead · 0 unknown 1 (1 open)

Neighboring counties

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next