Water hardness in Fulton County, OH

Water in Fulton County is very hard, with a median of 302 mg/L (17.7 grains per gallon) across 32 monitoring sites.

9% harder than the Ohio median (276 mg/L) 34th hardest of 88 counties
302mg/L
17.7 grains per gallon
Very hard

Fulton County water at a glance

  • HardnessVery hard (302 mg/L, 17.7 gpg, local measurements). Water softeners are common at this level.Size a water softener →
  • Private wellsWells aren't covered by public water rules; test yearly for bacteria and nitrate.Well testing →

What 302 mg/L means at home

  • Water softener: Scale build-up is likely. A water softener is commonly used to protect plumbing, water heaters and appliances.
  • Dishwasher: set the water hardness to about 17.7 gpg (16.9 °dH), which is a high or maximum hardness setting, with dishwasher salt if your model takes it.
  • Kettles and coffee makers: descale every 1–2 months with citric acid or vinegar.
  • Laundry and soap: hard water reduces lather, so you may need more detergent, or a softener.
  • Water heater: flush the tank once a year to clear sediment and scale.

Where the number comes from

Monitoring sites32
Lab samples273
Sample years2000–2024
Middle 50% of sites282–323 mg/L
Groundwater (wells, springs)273 mg/L · 4 sites
Surface water (rivers, lakes)304 mg/L · 28 sites

Measured hardness of local source water (mg/L as calcium carbonate) from Water Quality Portal (USGS, EPA and state agencies). Utilities that soften or blend water may deliver different numbers, so check your utility's Consumer Confidence Report for exact tap values. Methodology · On a private well? How to test it

Water softener and dishwasher calculator for Fulton County

Prefilled with Fulton County's measured local hardness of 302 mg/L (17.7 gpg). If your water bill or utility report gives a different number, enter it instead.

Softener capacity needed (at least)–
Dishwasher setting–set your dishwasher's water hardness to this
Sodium added by softening–

Softener sizes assume the EPA average of 82 gallons per person per day; sodium uses about 8 mg/L added per grain removed (University of Nebraska–Lincoln). More: do you need a softener? · softener salt and sodium · hardness converter

Fulton County on the Ohio map

Jackson CountyPickaway CountyHardin CountyWyandot CountyPaulding CountyRoss CountyRichland CountyTuscarawas CountyHenry CountyDarke CountyMorgan CountyShelby CountyVan Wert CountyCrawford CountyGuernsey CountyGeauga CountyPerry CountyMorrow CountyPutnam CountyHarrison CountySeneca CountyVinton CountyFayette CountyLicking CountyLake CountyStark CountyCuyahoga CountyFranklin CountyMiami CountyErie CountyHolmes CountyHighland CountyClark CountyFairfield CountyWarren CountyClinton CountyPreble CountyAthens CountyAuglaize CountyBrown CountyTrumbull CountyLorain CountyWayne CountyWood CountyMonroe CountyWilliams CountyLucas CountyGallia CountyClermont CountyHocking CountyHuron CountyCoshocton CountyBelmont CountyAshland CountyJefferson CountyAdams CountyMadison CountyMercer CountyMontgomery CountyMuskingum CountyPike CountyHamilton CountySandusky CountyScioto CountyButler CountyCarroll CountyMarion CountyMedina CountyLogan CountyPortage CountyMahoning CountyUnion CountyColumbiana CountyWashington CountyMeigs CountyAshtabula CountyLawrence CountyGreene CountyOttawa CountyHancock CountyChampaign CountyDelaware CountyNoble CountySummit CountyDefiance CountyKnox CountyAllen County

Cities and communities in Fulton County

PlaceMedian mg/LClassBased on
Wauseon 300 Very hard 17 sites within 10 miles
Archbold 308 Very hard 29 sites within 10 miles
Swanton 296 Very hard 42 sites within 10 miles
Delta 293 Very hard 28 sites within 10 miles
Fayette 332 Very hard 15 sites within 10 miles
Lyons 300 Very hard 7 sites within 10 miles
Metamora 284 Very hard 13 sites within 10 miles
Pettisville (CDP) 308 Very hard 21 sites within 10 miles
Tedrow (CDP) 314 Very hard 17 sites within 10 miles
Ai (CDP) 293 Very hard 28 sites within 10 miles

Water quality in Fulton County communities

Each community's public water system as listed by EPA: PFAS (EPA UCMR 5), lead service lines (EPA inventory) and health-based violations since 2016. Methodology

CommunityWater systemPFASLead linesViolations
Wauseon Wauseon City PWS 5 found 0 lead · 436 unknown 8
Archbold Archbold Village None detected 0 lead · 0 unknown 13
Swanton Swanton Village None detected 0 lead · 5 unknown None
Delta Delta Village 1 found 3 lead · 649 unknown 7
Fayette Fayette Village Not tested 0 lead · 426 unknown None
Lyons Lyons Village Not tested 0 lead · 0 unknown 2

Neighboring counties

Ohio

The statewide median is 276 mg/L (very hard) from 6,849 sites.

Ohio hardness map →

Hardness scale

Soft0–60 mg/L0–3.5 gpg
Moderately hard61–120 mg/L3.5–7 gpg
Hard121–180 mg/L7–10.5 gpg
Very hardover 180 mg/Lover 10.5 gpg

What to read next